Prediction of buckling failure load of 304 stainless-steel column at elevated temperatures using lead–antimony alloys. (September 2022)

• Record Type: Journal Article
• Authors: Kim, Jooniee; Choi, Young-Man; Okamoto, Koji; Jo, Byeongnam
• Is Part Of: Engineering failure analysis. Volume 139(2022)
• Publication Date: 2022-09
• Subjects: Buckling -- Lead–antimony alloy -- 304 stainless steel -- Nuclear power plant; System failures (Engineering) -- Periodicals; Fracture mechanics -- Periodicals; Reliability (Engineering) -- Periodicals; Pannes -- Périodiques; Rupture, Mécanique de la -- Périodiques; Fiabilité -- Périodiques; Fracture mechanics; Reliability (Engineering); System failures (Engineering); Periodicals; Electronic journals; 620.112
• DOI: 10.1016/j.engfailanal.2022.106480
• Languages: English
• ISSNs: 1350-6307

Abstract

Highlights: Novel prediction model for buckling failure load of 304 stainless steel was developed using Pb-Sb alloys. Sb-concentration dependent property of Pb-Sb alloy correlates with temperature dependency in stainless steel. Buckling failure load of Pb-Sb columns increases with Sb concentration. Nonlinear numerical model considering initial bending well estimates buckling failure load. Abstract: A novel prediction model for the buckling failure load of 304 stainless steel under compression was developed using lead–antimony (Pb–Sb) alloys. The temperature-dependent modulus of elasticity of 304 stainless steel was characterized by changing the Sb concentration of the Pb–Sb alloys from 0 to 15 wt%. Slender Pb–Sb plate columns with a rectangular cross section were fabricated by casting. Buckling tests were performed with Pb–Sb alloys under compression at room temperature and compared with numerical simulations that considered the nonlinearity of the specimen, such as initial bending. Based on the buckling failure load and the modulus of elasticity measurements, the linear relationship between the normalized buckling failure loads and the normalized modulus of elasticity was obtained for both Pb-Sb alloy and 304 stainless steel. The relationship between these two correlations makes it possible to predict the buckling failure load of 304 stainless steel at elevated temperatures up to 1200 °C.