Artificially roughened solar air heating technology – A comprehensive review. (September 2022)

• Record Type: Journal Article
• Authors: Khimsuriya, Yogeshkumar D.; Patel, D.K.; Said, Zafar; Panchal, Hitesh; Musa Jaber, Mustafa; Natrayan, L.; Patel, Vivek; El-Shafay, A.S.
• Is Part Of: Applied thermal engineering. Volume 214(2022)
• Publication Date: 2022-09
• Subjects: Solar energy -- Solar air heater -- Heat transmission -- Artificial roughness -- Nusselt number -- Friction factor -- Thermohydraulic performance parameter; Heat engineering -- Periodicals; Heating -- Equipment and supplies -- Periodicals; Periodicals; 621.40205
• DOI: 10.1016/j.applthermaleng.2022.118817
• Languages: English
• ISSNs: 1359-4311

Abstract

Highlights: Various artificial roughness geometries used by various researchers have been reported in current review article. Nu and f have been calculated for the twelve roughness geometries, and a comparison has been made to opt for the best roughness among them. At Re = 24, 000 perforated V-shape baffles gave the highest Nu compare to other roughness geometries, it has Nu 6.5 times higher than the smooth SAH. Similarly, at Re = 24, 000f for protrusion roughness has been found to have the lowest value of f compared to the other roughness geometries. Abstract: For various heating applications like space heating, timber seasoning, food drying, HVAC processes, water desalination processes, etc., where a low to medium heating source is required, the solar air heater is the most promising device to supply the appropriate heated working fluid with least possible cost of heating processes. Over the years, the improvement in the performance of the SHAs has become a fascinating area of research. The thermal efficiency of SAH is low because the boundary layer generation on the absorber plate causes resistance to heat transmission. Artificial roughness is the most efficient technique to break the laminar boundary layer, hence improving heat transmission. In this paper, various artificial roughness geometries used by various researchers have been reported. Based on the correlations and optimum parameters for the respective roughness provided by the respective authors, Nu, f, and thermohydraulic performance parameter have been calculated for the eleven roughness geometries using Microsoft excel 2021, and a comparison has been made to opt for the best roughness among them. At Re = 24, 000, internal conical ring obstacles with impinging jets give the highest Nu compared to other roughness geometries; which has Nu 4.89 times higher than the smooth SAH. Similarly, at Re = 24, 000, f for discrete reverse NACA 0040 profile roughness has been found to have the lowest value of f compared to the other roughness geometries, and it has f as 1.32 times higher compared to the smooth SAH. Thermohydraulic performance parameter ( η ) was found highest for perforated conical disc inserts with helical corrugations roughness at R e < 16000 and lowest for perforated delta roughness at Re > 16000 . The thermohydraulic performance parameter ( η ) has a maximum value of 2.440 for a hybrid broken arc with staggered ribs roughness at Re = 24, 000. It has been noted that tremendous numerical and experimental work has been reported in the literature. In this study, key findings are discussed, the influence of the various roughness parameters on heat transmission and pressure drop are summarized, and recommendations are also provided for future research.