Thermodynamic and thermal comfort performance evaluation of two geothermal high-temperature cooling systems in the mediterranean climate. (15th September 2022)

• Record Type: Journal Article
• Authors: Pieskä, Henrikki; Wang, Cong; Nourozi, Behrouz; Ploskić, Adnan; Wang, Qian
• Is Part Of: Journal of building engineering. Volume 56(2022)
• Publication Date: 2022-09-15
• Subjects: High-temperature cooling -- Geothermal cooling -- Indoor environment -- Exergy -- Building retrofit; Building -- Periodicals; 690.05
• DOI: 10.1016/j.jobe.2022.104738
• Languages: English
• ISSNs: 2352-7102

Abstract

Abstract: The European Commission aims to reduce the greenhouse gas emissions of the European Union's building stock by 60% by 2030 compared with 1990. Meanwhile, the global demand for cooling is projected to grow 3% yearly between 2020 and 2050. High-temperature cooling systems provide cooling with lower exergy use than conventional cooling systems and enable the integration of renewable energy sources, and can play a crucial role in meeting the growing cooling demand with less energy use. The aim of this study is to analyse and critically evaluate two high-temperature cooling systems in terms of their energy and exergy use in a case study. We also consider thermal comfort performance, CO2 emissions, and sensitivity to changing operating conditions. The two systems considered are a mechanical ventilation system with heat recovery combined with geothermal cooling (GeoMVHR) and a radiant cooling system with ceiling panels connected to the same geothermal cooling (GeoRadiant) system. The study is conducted using building energy models of a typical office building belonging to a three-building school complex located in Sant Cugat near Barcelona, Spain. IDA ICE 4.8 simulation software was used for the simulations. The results show that the two different installations can produce near-identical thermal comfort conditions for the occupants. The GeoRadiant system achieves this result with 72% lower electricity use and 60% less exergy destruction than the GeoMVHR system. Due to the higher electricity use, the CO2 emissions caused by the GeoMVHR system are 3.5 times the emissions caused by the GeoRadiant system. Highlights: Radiant and all-air cooling systems reached equal operative temperatures. In all-air system, pumps and fans use 255% more electricity than in radiant system. All-air system's exergy destruction is 2.5 times that of radiant system's. All-air system's CO2 emissions are 3.5 times that of radiant system's. Low temperature lift required by the systems permits the use of geothermal heat.