Effect of Maleinized Linseed Oil (MLO) on thermal and rheolological properties of PLA/MWCNT and PLA/HNT nanocomposites for additive manufacturing. Issue 6 (27th April 2020)

• Record Type: Journal Article
• Authors: Cobos, Christian Mauricio; Fenollar, Octavio; López Martinez, Juan; Ferrandiz, Santiago; Garzón, Luis
• Is Part Of: Rapid prototyping journal. Volume 26:Issue 6(2020)
• Page Start: 1027
• Page End: 1033
• Publication Date: 2020-04-27
• Subjects: 3D printing -- Additive manufacturing -- Carbon nanotubes -- Halloysite nanotubes -- Polylactic acid -- Maleinized linseed oil -- Thermal -- Rheological; Engineering design -- Periodicals; 620.004205
• DOI: 10.1108/RPJ-08-2019-0217
• Languages: English
• ISSNs: 1355-2546

Abstract

Abstract : Purpose: This paper aims to describe the influence of maleinized linseed oil (MLO), when used as a lubricant, on the thermal and rheological properties of PLA/MWCNTs (polylactic acid/multi-walled carbon nanotubes) and PLA/HNT (halloysite nanotubes) nanocomposites, as a reference for application in 3D printing processes. Design/methodology/approach: Nanocomposites were obtained by melting in a twin-screw extruder, mixing PLA with MWCNTs and HNTs in different percentages of 0.5, 0.75 and 1 Wt.% for subsequent mixing by the same process with 5 phr MLO, for application in additive manufacturing, as analyzed by means of differential scanning calorimetry (DSC), capillary rheometry, melt flow rate (MFL) and field emission scanning electron microscopy (FESEM). Findings: The results obtained for thermal characterization by using DSC indicate the non-variation of glass transition temperature Tg = 62 ± 2°C and a melting temperature (Tm) around 170°C. Crystallization temperature dropped by approximately 12°C, which should be kept in mind during the transformation processes. The values obtained by capillary rheometry indicate that the material's viscosity is reduced by the influence of the MLO plasticizer's lubricant effect on the PLA's molecular structure. The melt flow index values confirm a rise of approximately 46% in the flow index and back up the capillary rheometry results. The values obtained were as follows: PLA/0.5 Wt.% MWCNT/MLO 5 phr 54.07, PLA/0.75 Wt.% MWCNT/MLO 5 phr 53.46, PLA/1 Wt.% MWCNT/MLO 5 phr 51.84y PLA/0.5 Wt.% HNT/MLO 5 phr 61.8, PLA/0.75 Wt.% HNT/MLO 5 phr 68.3 and PLA/1 Wt.% HNT/MLO 5 phr 71.2 g/10 min. Apart from the nanocharge distribution, the information obtained from the FESEM shows the existence of a cluster, which could have been avoided by more energetic stirring during the nanocompound manufacturing process. Social implications: This paper presents an analysis of the insertion of plasticizer in nanocomposites for the application in additive manufacturing processes in fusion deposition modelling (FDM) system. Originality/value: This is a novel original research work.