Direct ink writing of high-performance Bi2Te3-based thermoelectric materials using quasi-inorganic inks and interface engineering. Issue 24 (1st June 2022)

• Record Type: Journal Article
• Authors: Wang, Zhengshang; Cui, Wen; Yuan, Hao; Kang, Xiaoli; Zheng, Zhou; Chen, Longqin; Hu, Qiujun; Qiu, Wenbin; Tang, Jun; Cui, Xudong
• Is Part Of: Journal of materials chemistry. Volume 10:Issue 24(2022)
• Page Start: 12921
• Page End: 12927
• Publication Date: 2022-06-01
• Subjects: Materials -- Research -- Periodicals; Chemistry, Analytic -- Periodicals; Environmental sciences -- Research -- Periodicals; 543.0284
• DOI: 10.1039/d2ta02289c
• Languages: English
• ISSNs: 2050-7488

Abstract

Abstract : We report that quasi-inorganic inks and interface engineering trigger a large enhancement of thermoelectric performance in 3D-printed Bi2 Te3 -based materials. Abstract : Direct ink writing offers a unique solution for constructing shape-controllable devices. In this way, thermoelectric (TE) devices can optimize power generation from industrial waste heat by the design of structural parameters. Despite recent interest in the so-called all-inorganic inks with inorganic binders to engineer viscoelasticity, organic impurities may also be triggered by high portion of organic solvents, which hamper the electron and phonon transport. Herein, we report water-based inks to reduce organic residuals. The quasi-inorganic inks were synthesized by adding Bi2 Te3 -based particles to water solvent with a few organic binders, whose total organic content is less than that of all-inorganic inks. Moreover, an interface-solder approach is employed to fill the pores among grain particles with the liquefied phase. As a result, there is a tremendous enhancement of ZT values, reaching 0.71 and 0.59 for 3D-printed p- and n-type Bi2 Te3 -based TE materials, respectively. In particular, the flexible method promotes the realization of waste heat harvesting from an alumina pipe by fabricating a TE module integrated with printed half-annular legs. Our work demonstrates not only the effectiveness of quasi-inorganic inks and interface engineering as a means of increasing ZT values, but also the great potential of 3D-printed Bi2 Te3 -based TEGs for waste heat recovery.