Deuterium retention and removal in liquid lithium determined by in situ NRA in Magnum-PSI. (1st July 2022)

• Record Type: Journal Article
• Authors: Ou, W.; Arnoldbik, W.M.; Li, K.; Rindt, P.; Morgan, T.W.
• Is Part Of: Nuclear fusion. Volume 62:Number 7(2022)
• Publication Date: 2022-07-01
• Subjects: lithium -- deuterium retention -- in situ nuclear reaction analysis; Nuclear fusion -- Periodicals; 621.48405
• DOI: 10.1088/1741-4326/ac3295
• Languages: English
• ISSNs: 0029-5515

Abstract

Abstract: In this work, Li-filled 3D-printed porous tungsten samples were exposed to deuterium (D) plasma in Magnum-PSI with a wide ion flux from 4 × 10 22 to 1.5 × 10 24 m −2 s −1 and with a corresponding wide temperature range from below Li melting point (180.5 °C) to above Li deuteride (LiD) melting point (∼690 °C). The formation, decomposition and melting of LiD have been directly observed in the experiment via infra-red thermometry and visually post-mortem while still in vacuo, and correlated to the D retained content. The LiD formation was characterized by a solid precipitate layer formed on the surface with high emissivity (0.6–0.9) characterized by a blue or dark blue color after exposure. The melting of Li–LiD layer was found to occur close to the temperature predicted by Li–LiD phase diagram. In situ nuclear reaction analysis (NRA) was applied to perform the measurement of D retained in Li samples immediately after exposure without breaking the vacuum. D depth profiles were determined by NRA, in which the highest D concentration (15–45 at.%) was found in the top several micrometers and decreases with depth to low levels (<5%) within 5–30 μ m. No pure LiD layer was found on the sample surfaces, however a D concentration close to 50 at.% was observed on a Li-D co-deposited layer on the clamping ring in some cases. The experiments also indicate that the D retained increases with increasing temperature until ∼500 °C. At temperatures beyond ∼500 °C the dissociation of LiD starts to dominate and the deuterium retention started to decrease. Overall, D retained fraction for all cases was found to be below ∼2%, which is significantly different from literatures where full uptake has been suggested. A 1D reaction–diffusion (RD) model based on D diffusion and chemical reactions with Li has been built. D depth profiles from the RD modelling can roughly match that from NRA measurement and a low D retained fraction below ∼2% was also indicated by the model. The model can also help explain the relationship between D retained and the surface temperature and fluence. After D plasma exposure, either helium or H plasma was utilized to remove the retained D in Li and both were proved to be effective and the removal efficiency can be as high as 96% above 420 °C.