Shear enhancement in RC beams without shear reinforcement simultaneously loaded within 2d and at 3d from supports. (August 2022)

• Record Type: Journal Article
• Authors: Pastore, Marcus Vinicius Filiagi; Vollum, Robert Lars
• Is Part Of: Structures. Volume 42(2022)
• Page Start: 343
• Page End: 366
• Publication Date: 2022-08
• Subjects: Shear enhancement -- Multiple point loads -- Strut and tie -- Design standards; Structural engineering -- Periodicals; 624.1
• DOI: 10.1016/j.istruc.2022.05.095
• Languages: English
• ISSNs: 2352-0124

Abstract

Abstract: Shear resistance is increased by arching action when reinforced concrete (RC) beams are loaded within around twice the beam effective depth ( d ) of supports. The vast majority of laboratory tests have investigated shear enhancement in beams under three- or four-point loading with all loads applied within 2 d of supports. This type of loading is representative of deep beams but not slender beams and slabs which are invariably loaded within the span when subject to point loads near supports. The latter problem arises in many guises in practice but is scarcely researched. The motivation for looking into the problem was the difference in design approaches adopted in EC2 and the superseded UK code BS8110. The former accounts for shear enhancement by reducing the design shear force while the latter increases the design shear resistance within 2 d of supports. The UK National Annex to Eurocode 2 Part 2 Concrete Bridges adopts the approach of BS8110 for members without shear reinforcement. The paper presents the results of tests on four simply supported RC beams without shear reinforcement in which the loading arrangements were chosen to investigate the influence on shear enhancement of applying loads both within and outside 2 d of supports. Digital image correlation (DIC) system was used to investigate the crack kinematics and shear resisting mechanisms of each beam. The BS8110 approach to shear enhancement is shown to be potentially unsafe for beams without shear reinforcement. Good predictions of strength were obtained with EC2 as well as strut and tie modelling in which the concrete strength was determined using the Modified Compression Field Theory.