A comparative investigation between the beam spring method and the modified routine method in special‐section shield tunnels: A case study for quasi‐rectangular tunnels. (20th April 2022)

• Record Type: Journal Article
• Authors: Zhang, Weixi; De Corte, Wouter; Liu, Xian; Taerwe, Luc
• Is Part Of: International journal for numerical and analytical methods in geomechanics. Volume 46:Number 9(2022)
• Page Start: 1754
• Page End: 1781
• Publication Date: 2022-04-20
• Subjects: beam spring modelling -- bending moment transfer -- modified routine modelling -- quasi‐rectangular shield tunnel -- special‐section shield tunnel; Soil mechanics -- Mathematics -- Periodicals; Rock mechanics -- Mathematics -- Periodicals; 624.1510151
• DOI: 10.1002/nag.3367
• Languages: English
• ISSNs: 0363-9061

Abstract

Abstract: The modified routine modelling (MRM) and the beam spring modelling (BSM) are two of the classical design methods for circular shield tunnels, but a comparison between their applications in special‐section shield tunnels (SSSTs) has not yet been conducted. In this study, these two methods are investigated and compared specifically for the case of quasi‐rectangular shield tunnels (QRSTs). While the MRM gives acceptable results for axial force values, some critical bending moments in joint sections and segment sections can be overestimated or underestimated, not giving accurate values for design. It is demonstrated that the MRM cannot precisely predict the degree of bending moment transfer and convergence deformations of the studied SSST, and should only be used in preliminary design. On the other hand, deeper insights into the mechanical behaviour of the QRST lining structure can be gained through the analysis of the BSM. The staggered assembly pattern results in a bending moment transfer between rings and the relatively stiff area sustains the transferred moment from its neighbouring less stiff areas. For most of the longitudinal joints, 20% to 40% of bending moment is redistributed to its neighbouring segments. The transfer increases the non‐symmetric distribution of bending moments in the two halves of a QRST lining ring. This characteristic does not exist in a traditional circular shield tunnel but needs due attention to the types of shield tunnels with two compartments in one tube. Finally, the influences of different parameters related to the assumed pressures and soil reactions are discussed.