Design, additive manufacturing and component testing of pneumatic rotary vane actuators for lightweight robots. Issue 11 (13th May 2022)

• Record Type: Journal Article
• Authors: Dämmer, Gabriel; Bauer, Hartmut; Neumann, Rüdiger; Major, Zoltan
• Is Part Of: Rapid prototyping journal. Volume 28:Issue 11(2022)
• Page Start: 20
• Page End: 32
• Publication Date: 2022-05-13
• Subjects: Actuators -- Functional testing -- Moulding -- Polymers -- Robotics -- Additive manufacturing; Engineering design -- Periodicals; 620.004205
• DOI: 10.1108/RPJ-03-2021-0052
• Languages: English
• ISSNs: 1355-2546

Abstract

Abstract : Purpose: This study aims to investigate the suitability of a multi-step prototyping strategy for producing pneumatic rotary vane actuators (RVAs) for the development of lightweight robots and actuation systems. Design/methodology/approach: RVAs typically have cast aluminum housings and injection-molded seals that consist of hard thermoplastic cores and soft elastomeric overmolds. Using a combination of additive manufacturing (AM), computer numerical control (CNC) machining and elastomer molding, a conventionally manufactured standard RVA was replicated. The standard housing design was modified, and polymeric replicas were obtained by selective laser sintering (SLS) or PolyJet (PJ) printing and subsequent CNC milling. Using laser-sintered molds, actuator seals were replicated by overmolding laser-sintered polyamide cores with silicone (SIL) and polyurethane (PU) elastomers. The replica RVAs were subjected to a series of leakage, friction and durability experiments. Findings: The AM-based prototyping strategy described is suitable for producing functional and reliable RVAs for research and product development. In a representative durability experiment, the RVAs in this study endured between 40, 000 and 1, 000, 000 load cycles. Frictional torques were around 0.5 Nm, which is 10% of the theoretical torque at 6 bar and comparable to that of the standard RVA. Models and parameters are provided for describing the velocity-dependent frictional torque. Leakage experiments at 10, 000 load cycles and 6 bar differential pressure showed that PJ housings exhibit lower leakage values (6.8 L/min) than laser-sintered housings (15.2 L/min), and PU seals exhibit lower values (8.0 l/min) than SIL seals (14.0 L/min). Combining PU seals with PJ housings led to an initial leakage of 0.4 L/min, which increased to only 1.2 L/min after 10, 000 load cycles. Overall, the PU material used was more difficult to process but also more abrasion- and tear-resistant than the SIL elastomer. Research limitations/implications: More work is needed to understand individual cause–effect relationships between specific design features and system behavior. Originality/value: To date, pneumatic RVAs have been manufactured by large-scale production technologies. The absence of suitable prototyping strategies has limited the available range to fixed sizes and has thus complicated the use of RVAs in research and product development. This paper proves that functional pneumatic RVAs can be produced by using more accessible manufacturing technologies and provides the tools for prototyping of application-specific RVAs.