A novel Mn4+-activated fluoride red phosphor Cs30(Nb2O2F9)9(OH)3·H2O:Mn4+ with good waterproof stability for WLEDs. Issue 18 (15th April 2022)

• Record Type: Journal Article
• Authors: Chen, Yingyuan; Liu, Feilong; Zhang, Ziwang; Hong, Junyu; Molokeev, Maxim S.; Bobrikov, Ivan A.; Shi, Jianxin; Zhou, Jianbang; Wu, Mingmei
• Is Part Of: Journal of materials chemistry. Volume 10:Issue 18(2022)
• Page Start: 7049
• Page End: 7057
• Publication Date: 2022-04-15
• Subjects: Materials -- Periodicals; Chemistry, Analytic -- Periodicals; Optical materials -- Research -- Periodicals; Electronics -- Materials -- Research -- Periodicals; 543.0284
• DOI: 10.1039/d2tc00132b
• Languages: English
• ISSNs: 2050-7526

Abstract

Abstract : Due to the presence of Nb 5+, a Mn 4+ -doped compound (denoted as CNOFM) shows very good waterproof stability, even without any surface modification. Warm WLEDs with a high color rendering index have been fabricated using the CNOFM red phosphor. Abstract : Red-light-emitting materials, as pivotal components of warm white light-emitting diodes (WLEDs), have drawn increasing public focus. Among these, Mn 4+ -doped red light-emitting fluorides have drawn considerable attention when combined with an InGaN chip; however, they suffer from poor water stability under humid conditions. In this work, a novel fluoride red phosphor, Cs30 (Nb2 O2 F9 )9 (OH)3 ·H2 O: x Mn 4+ (CNOFM), with good water resistance was synthesized for the first time using a facile co-precipitation method at ambient temperature. Experiments were implemented for the precise analysis of its crystal structure, optical properties, micro-morphology, thermal behavior, and waterproof properties. 6.66% Mn 4+ -doped CNOFM maintained a stable crystal structure and possessed strong PL intensity located at 633 nm with high color purity of 96%. CNOFM showed better thermal and waterproof stability compared with the commercial K2 SiF6 :Mn 4+ red phosphor. Without any surface modifications, the PL intensity remained at about 83% of the initial value after immersion in water for 60 min, and the mechanism was investigated. Finally, a warm WLED with a CRI of 92.3 and CCT of 3271 K was fabricated using the CNOFM red phosphor.