Self-adhesive polyurethane via selective photo-polymerization for biocompatible epidermal soft sensor and thermal heater. (June 2022)

• Record Type: Journal Article
• Authors: Hwang, Taeseung; Lee, Hee Jin; Hwang, Suwon; Yang, Haechang; Kim, Hyeonwoo; Jang, Soyoung; Jeong, Hoon Eui; Ryoo, Zae Young; Yeo, Junyeob
• Is Part Of: Applied materials today. Volume 27(2022)
• Publication Date: 2022-06
• Subjects: Polyurethane -- Self-adhesive -- Biocompatibility -- Epidermal soft sensor -- Attachable epidermal thermal heater; Materials science -- Periodicals; Materials -- Research -- Periodicals; 620.1105
• DOI: 10.1016/j.apmt.2022.101479
• Languages: English
• ISSNs: 2352-9407

Abstract

Highlight: Polyurethane had adhesive property by laser-induced selective photo-polymerization. Defective crosslinking networks enhanced the adhesive properties of polyurethane. Biocompatibility of photo-polymerized polyurethane was confirmed through mouse test. Self-adhesive soft sensor detected multiple human motions and sensitive bio-signals. Attachable heater efficiently transferred heat to skin through conformal contact. Abstract: Polyurethane (PU) is the most extensively used soft backbone substrate for wearable applications. However, even with biocompatibility and stretchability, PU-based wearable devices are unsuitable for epidermal devices because they lack of adhesive properties. To impart adhesive properties to PU, commercial adhesive additives are required or the mixing ratio of specific materials should be adjusted. Despite PU biocompatibility, additional additives cause skin damage because they are not usually biocompatible due to their toxic ingredient. This study introduces a simple method of fabricating self-adhesive polyurethane (SAPU) without specific adhesive additives for a biocompatible epidermal soft sensor and an attachable epidermal thermal heater. During the selective photo-polymerization of PU resin, the defective crosslinking networks between laser-scanned resin lines enhance the adhesive properties of PU. Adjusting photo-polymerization conditions results in self-adhesive polyurethane with high adhesiveness and low Young's modulus comparable to those of human skin. A mouse skin toxicity test confirms the biocompatibility and highly conformal contact of SAPU. SAPU is then further applied for the fabrication of a biocompatible epidermal soft sensor and an attachable epidermal thermal heater with silver nanowire network. The fabricated self-adhesive epidermal soft sensor successfully detects human motion and bio-signals, whereas the self-adhesive epidermal soft heater efficiently transfers heat to the epidermis due to its excellent conformal contact characteristics on the human skin. Graphical abstract: Image, graphical abstract