Environmentally friendly high performance Zn-air rechargeable battery using cellulose derivatives: A 3D-printed prototype. (May 2022)

• Record Type: Journal Article
• Authors: Nagy, Tibor; Nagy, Lajos; Erdélyi, Zoltán; Baradács, Eszter; Deák, György; Zsuga, Miklós; Kéki, Sándor
• Is Part Of: Journal of energy storage. Volume 49(2022)
• Publication Date: 2022-05
• Subjects: Zn-air secondary battery -- Cellulose derivatives -- Environmentally friendly -- Biodegradable -- 3D printing; Energy storage -- Periodicals; Energy storage -- Research -- Periodicals; 621.3126
• DOI: 10.1016/j.est.2022.104173
• Languages: English
• ISSNs: 2352-152X

Abstract

Highlights: A novel environmentally friendly 3D-printed Zn-air secondary battery was developed. Biocompatible, biodegradable and commercially available materials have been used. Cellulose based diaphragm and additive result in successful deposit suppression. High efficiency and stable long-term performance was achieved. Abstract: In this paper an environmentally friendly high performance prototype of rechargeable Zn-air battery using cellulose based biodegradable matters as additive and diaphragm is reported. During designing we were aspired to construct a heavy metal free cell containing nontoxic, commercially available biodegradable feedstock. The fix cell geometry was granted by 3D-printing. Charging/discharging cycle tests were performed using cotton lattice or cellophane diaphragms separately. The presence of carboxymethyl cellulose sodium salt (CMC-Na, Mn: 90 kDa and 250 kDa with f = 0.7 or f = 1.2 average functionality) additives in the electrolyte was also tested. Significant difference was found between the cells operated with and without additives. Two main benefits of the application of CMC-Na salts were observed: (i) by increasing the viscosity of the electrolyte the rate of evaporization of the water was decreased; (ii) owing to the higher viscosity of the lye and the good chelating agent properties of the carboxyl functional groups more stable cell operation was obtained. Using cotton lattice as diaphragm, 100% Coulomb efficiency was detected during the entire measurement (more than 1000 cycles), while the weight of zinc electrode was constant and its surface remained smooth. Additional cyclic voltammetry tests were also carried out to investigate the electrode processes and the change of the electrode surface was monitored by scanning electron microscopy. Graphical abstract: Image, graphical abstract