Ultra-fast high-temperature sintering of strontium titanate. (1st June 2022)

• Record Type: Journal Article
• Authors: Mishra, Tarini Prasad; Wang, Shufan; Lenser, Christian; Jennings, Dylan; Kindelmann, Moritz; Rheinheimer, Wolfgang; Broeckmann, Christoph; Bram, Martin; Guillon, Olivier
• Is Part Of: Acta materialia. Volume 231(2022)
• Publication Date: 2022-06-01
• Subjects: Ultrafast High-temperature sintering (UHS) -- Strontium titanate (SrTiO3) -- Fast firing -- Grain growth -- Electric current assisted sintering (ECAS) -- FEM simulation -- Electrical conductivity; Materials -- Periodicals; Materials science -- Periodicals; Materials -- Mechanical properties -- Periodicals; Metallurgy -- Periodicals; Chemistry, Inorganic -- Periodicals; 620.112
• DOI: 10.1016/j.actamat.2022.117918
• Languages: English
• ISSNs: 1359-6454

Abstract

Abstract: Ultrafast High-temperature Sintering (UHS) is a novel sintering process enabling extremely high heating rates by direct contact of sample to electrically heated thin carbon strips. Using strontium titanate as a model system, the densification behavior by UHS was investigated. Controlled experiments via maximum current limitation were used to study the influence of the applied current on the degree of densification and resulting final grain size. Simulations by Finite Element Modeling (FEM) allow estimating the sample temperature reached during UHS, which is in good agreement with the experimental data. Moreover, the FEM simulations show a self-stabilization of the sample temperature by thermal radiation. UHS results suggest that rapid densification can be achieved with an extremely high heating rate. The microstructure of the undoped strontium titanate samples shows exaggerated grain growth and pore-boundary separation, which results in pore entrapment inside grains. The addition of 2 mol% iron in strontium titanate is beneficial by limiting the grain growth during the UHS sintering cycle. Uniform densification and grain growth in the sample is consequently observed. Scanning transmission electron microscopy/energy dispersive x-ray spectroscopy (STEM/EDS) is utilized to analyze grain boundary segregation. Measurement of the electrical conductivity of the UHS sintered samples by impedance spectroscopy suggest that rapid densification by UHS enables full access to the functional properties of strontium titanate as compared to the conventionally sintered material. Graphical abstract: Image, graphical abstract