Fracture Resistance of Single‐Unit Implant‐Supported Crowns: Effects of Prosthetic Design and Restorative Material. Issue 4 (30th August 2021)

• Record Type: Journal Article
• Authors: Donmez, Mustafa Borga; Diken Turksayar, Almira Ada; Olcay, Emin Orkun; Sahmali, Sevil Meral
• Is Part Of: Journal of prosthodontics. Volume 31:Issue 4(2022)
• Page Start: 348
• Page End: 355
• Publication Date: 2021-08-30
• Subjects: Fracture resistance -- implant -- PEEK -- screw‐cement crown; Prosthodontics -- Periodicals; Dental implants -- Periodicals; Dentistry -- Periodicals; 617.69
• DOI: 10.1111/jopr.13415
• Languages: English
• ISSNs: 1059-941X

Abstract

Abstract: Purpose: To evaluate the fracture resistance and fracture patterns of single implant‐supported crowns with different prosthetic designs and materials. Materials and Methods: One hundred and forty‐four identical crowns were fabricated from zirconia‐reinforced lithium silicate (ZLS), leucite‐based (LGC), and lithium disilicate (LDS) glass‐ceramics, reinforced composite (RC), translucent zirconia (ZR), and ceramic‐reinforced polyetheretherketone (P). These crowns were divided into 3 subgroups according to restoration design: cementable crowns on a prefabricated titanium abutment, cement‐retained crown on a zirconia‐titanium base abutment, and screw‐cement crown (n = 8). After adhesive cementation, restorations were subjected to thermal‐cycling and loaded until fracture. The fracture patterns were evaluated under a stereomicroscope. Statistical analysis was performed by using 2‐way ANOVA/Bonferroni multiple comparison post hoc test (α = 0.05). Results: For each prosthetic design, ZR presented the highest fracture resistance ( p ≤ 0.005). Other than the differences with ZLS and RC for screw‐cement crowns ( p > 0.05) and RC for crowns on zirconia‐titanium base abutments ( p > 0.05), LGC showed the lowest fracture resistance. P endured higher loads than LDS ( p < 0.001), except for the crowns on zirconia‐titanium base abutments ( p > 0.05). Cementable crowns presented the highest fracture resistance ( p < 0.001), other than LGC and LDS. The differences between LGC crowns ( p > 0.05) or LDS crowns on prefabricated titanium and zirconia‐titanium abutments were nonsignificant ( p = 0.133). Fragmented crown fracture was predominant in most of the restorations. Screw and abutment fractures were observed in ZR screw‐cement crowns, and all P crowns were separated from the abutments. Conclusions: Restorative material and restoration design affect the fracture resistance and fracture pattern of implant‐supported single‐unit restorations. Clinicians may restore single‐unit implants in premolar sites with the materials and prosthetic designs tested in the present study.