Rapid screening procedures for a variety of complex forensic samples using laser diode thermal desorption (LDTD) coupled to different mass spectrometers. (6th March 2022) - Jagerdeo, Eshwar
Abstract : Rationale: The applications shared in this paper demonstrate the wide variety of samples that can be analyzed when Laser Diode Thermal Desorption (LDTD) is interfaced with a high‐resolution mass spectrometer and show the speed at which high quality data can be generated from complex matrices. Methods: Samples are solvent extracted and spotted in a 96‐well plate. In the case of biological fluids, hydrolysis followed by solid‐phase extraction is required. The solvent in the 96‐well plate is evaporated followed by mass spectrometric (MS) analysis with atmospheric pressure chemical ionization. Where applicable, the instrument is operated in data‐dependent mode, with a full‐scan mass spectrum followed by MS/MS spectra of the top 10 ions with a total runtime of 0.4 min. Results: Four applications (MAAQ and Tear Gas, twelve rodenticides, seven explosives, and 40 drugs of abuse) are reported in this paper. MAAQ, tear gas, and rodenticides were identified by full‐scan, followed by MS/MS experiments at levels of 125 μg/L, 125 μg/L, and 500 μg/L, respectively. Explosives were all identified at 102 μg/L by full‐scan experiments. The drugs of abuse were identified by multiple reaction monitoring (MRM) experiments at defined cutoff levels from 2 to 1000 μg/L. Conclusions: Interfacing LDTD with a mass spectrometer allows for rapid screening of a wide range of samples, with either minimal or complex sample preparation. Using a high‐resolution mass spectrometer with the combination to perform full‐scan and MS/MS experiments adds a high level of specificity.