Analytical solution for one‐dimensional steady‐state contaminant transport through a geomembrane layer (GMBL)/compacted clay layer (CCL)/attenuation layer (AL) composite liner considering consolidation. (21st January 2022)

• Record Type: Journal Article
• Authors: Yan, Huaxiang; Xie, Haijian; Ding, Hao; Yang, Dandi; Chen, Cong; Chen, Yunmin; Chen, Yun
• Is Part Of: International journal for numerical and analytical methods in geomechanics. Volume 46:Number 6(2022)
• Page Start: 1046
• Page End: 1063
• Publication Date: 2022-01-21
• Subjects: analytical model -- attenuation layer -- composite liner -- consolidation -- contaminant transport -- landfill; Soil mechanics -- Mathematics -- Periodicals; Rock mechanics -- Mathematics -- Periodicals; 624.1510151
• DOI: 10.1002/nag.3334
• Languages: English
• ISSNs: 0363-9061

Abstract

Abstract: A composite liner system consisting of a geomembrane layer (GMBL), a compacted clay layer (CCL) and an attenuation layer (AL) is widely used in the modern landfills. The field and experimental observations highlight the potential detrimental effects on breakthrough of contaminants induced by consolidation of soil liner when a relatively high applied stress is caused by the waste placement. A one dimensional steady‐state model is developed to investigate the behaviour of contaminant transport in GMBL/CCL/AL composite liner system considering consolidation. Effects of the consolidation process on the transport of typical contaminants are investigated by the proposed analytical solution. The analytical results show that the magnitude of volume compressibility coefficient in the AL is important in controlling the overall magnitude of the consolidation induced effects. The process of consolidation shows a larger impact on the absorbable pollutants compared to the non‐absorbable pollutants. This may be due to the fact that the migration of solid particles induced by the consolidation may assist the transport of contaminant absorbed on them. The thickness of the AL shows large impacts on the bottom flux for the case with a high volume compressible coefficient. Increasing the thickness of AL from 1 to 3 m can results in a factor of 2.6 increase of the bottom flux. Increasing the thickness of the AL leads to a larger consolidation advection and a longer consolidation path, which may be the dominant mechanisms for contaminant transport compared to the diffusion process.