Flexible InP–ZnO nanowire heterojunction light emitting diodes. Issue 4 (10th March 2022)

• Record Type: Journal Article
• Authors: Gagrani, Nikita; Vora, Kaushal; Fu, Lan; Jagadish, Chennupati; Tan, Hark Hoe
• Is Part Of: Nanoscale horizons. Volume 7:Issue 4(2022)
• Page Start: 446
• Page End: 454
• Publication Date: 2022-03-10
• Subjects: Nanoscience -- Periodicals; Nanotechnology -- Periodicals; 620.505
• DOI: 10.1039/d1nh00535a
• Languages: English
• ISSNs: 2055-6756

Abstract

Abstract : Flexible electronics are gaining rapid popularity in modern day life. We demonstrate a simplified process to make flexible LEDs using p-InP nanowires with conformal coating of ZnO and perform a systematic study. Abstract : Flexible, substrate-free nanowire (NW) devices are desirable to overcome the extremely challenging task of integrating III–V or III–N semiconductor devices such as LEDs and lasers on a range of optoelectronic circuits or biochips. In this work, we report the demonstration of core–shell p-InP/n-ZnO heterojunction NW array LEDs. The emission from the devices consists of three peaks at room temperature due to conduction band-to-heavy hole band transition, conduction band-to-light hole band transition and recombination at the substrate. At 78 K, an additional peak due to Zn acceptor levels is observed, whereas the peak due to the conduction band-to-light hole band transition quenches. Flexible LEDs are then fabricated by embedding the NW arrays in SU-8 to enable subsequent lift-off from the substrate. Compared with the original on-substrate LED device, broader, red-shifted and multiple peaks are observed from the flexible devices, which may be due to non-uniform strain related effects in the NWs caused by the SU-8 film. A slightly higher series resistance as compared to the on-substrate device and significant Joule heating suggest that good heatsinking is required for these flexible devices. Nevertheless, our study paves a promising way towards flexible and low power LEDs.