Facile Surface Engineering of Composite Electron Transport Layer for Highly Efficient Perovskite Solar Cells with a Fill Factor Exceeding 81%. Issue 6 (23rd January 2022)

• Record Type: Journal Article
• Authors: Zong, Beibei; Deng, Jianguo; Sun, Qing; Zhang, Zizhao; Meng, Xiangxin; Shen, Bo; Kang, Bonan; Silva, S. Ravi P.; Lu, Geyu
• Is Part Of: Advanced materials interfaces. Volume 9:Issue 6(2022)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2022-01-23
• Subjects: charge extraction capacity of electron transport layers -- energy level of electron transport layers -- perovskite solar cells -- SnO 2/perovskite interface -- x mg KC‐SnO 2; Materials science -- Periodicals; 620.11
• DOI: 10.1002/admi.202102331
• Languages: English
• ISSNs: 2196-7350

Abstract

Abstract: After perovskite became a star material, research on perovskite solar cells (PSCs) became a hot topic and developed rapidly. Electron transport layers (ETLs) with high mobility, low‐defect state, and suitable energy level arrangement dominate the development of planar heterojunction PSCs. In this work, the K + and Cs + doped composite SnO2 ETL ( x mg KC‐SnO2 ) by a continuous spin‐coating of the x mg Cs + @KOH and SnO2 aqueous solution shows a substantial improvement in carries extraction, transport and collection properties, leading to the increased fill factor (FF) from 72.48% to 81.00% of the planar heterojunction PSCs, and finally the champion device average efficiency is 21.62%. Moreover, this work improves the interface contacts between ETL/Perovskite, as it reduces energy disorder and simultaneously promotes electron transport, charge extraction at the interface, improve energy level alignment and quasi‐Fermi level splitting, and decreased resistance for charge transfer in the device. In conclusion, this simple and effective method of improving the FF value provides a certain shortcut to the performance of plane heterogeneous perovskite devices. Abstract : In perovskite solar cells, the K + and Cs + doped composite SnO2 electron transport layer (ETL) (x mg KC‐SnO2 ) shows a substantial improvement in carries extraction, transport and collection properties. meanwhile, optimized ETL improves the interface contacts between ETL/Perovskite. Finally, the fill factor value of the device is increased from the initial 72.48% to 81% when x = 10, and the champion device average efficiency is 21.62%.