Creep properties and deformation mechanisms of single-crystalline γ′-strengthened superalloys in dependence of the Co/Ni ratio. Issue 8 (18th April 2022)

• Record Type: Journal Article
• Authors: Volz, N.; Zenk, C.H.; Karpstein, N.; Lenz, M.; Spiecker, E.; Göken, M.; Neumeier, S.
• Is Part Of: Philosophical magazine. Volume 102:Issue 8(2022)
• Page Start: 718
• Page End: 744
• Publication Date: 2022-04-18
• Subjects: Creep -- electron microscopy -- superalloy -- deformation mechanisms -- solid solution strengthening -- stacking fault energy; Condensed matter -- Periodicals; Physics -- Periodicals; Matière condensée -- Périodiques; Physique -- Périodiques; 530.41
• DOI: 10.1080/14786435.2021.2017051
• Languages: English
• ISSNs: 1478-6435

Abstract

ABSTRACT: Co-base superalloys are considered as promising high temperature materials besides the well-established Ni-base superalloys. However, Ni appears to be an indispensable alloying element also in Co-base superalloys. To address the influence of the base elements on the deformation behaviour, high-temperature compressive creep experiments were performed on a single crystal alloy series that was designed to exhibit a varying Co/Ni ratio and a constant Al, W and Cr content. Creep tests were performed at 900 °C and 250 MPa and the resulting microstructures and defect configurations were characterised via electron microscopy. The minimum creep rates differ by more than one order of magnitude with changing Co/Ni ratio. An intermediate CoNi-base alloy exhibits the overall highest creep strength. Several strengthening contributions like solid solution strengthening of the γ phase, effective diffusion coefficients or stacking fault energies were quantified. Precipitate shearing mechanisms differ significantly when the base element content is varied. While the Ni-rich superalloys exhibit SISF and SESF shearing, the Co-rich alloys develop extended APBs when the γ ′ phase is cut. This is mainly attributed to a difference in planar fault energies, caused by a changing segregation behaviour. As a result, it is assumed that the shearing resistivity and the occurring deformation mechanisms in the γ ′ phase are crucial for the creep properties of the investigated alloy series.