Devulcanization of ethylene‐propylene‐diene monomer rubber waste. Effect of diphenyl disulfide derivate as devulcanizing agent on vulcanization, and devulcanization process. Issue 20 (10th January 2022)

• Record Type: Journal Article
• Authors: Gschwind, Larissa; Jordan, Carmen‐Simona; Vennemann, Norbert
• Is Part Of: Journal of applied polymer science. Volume 139:Issue 20(2022)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2022-01-10
• Subjects: EPDM rubber waste -- devulcanization -- disulfide -- TSSR -- vulcanization; Polymers -- Periodicals; Polymerization -- Periodicals; 668.9
• DOI: 10.1002/app.52141
• Languages: English
• ISSNs: 0021-8995

Abstract

Abstract: A systematic study was performed to understand the effects of the devulcanizing agent dibenzamido diphenyl disulfide (DBD) on the vulcanization and devulcanization process of a sulfur‐cured ethylene‐propylene‐diene monomer (EPDM) rubber. The influence of DBD on vulcanization was investigated by mixing DBD with virgin rubber and curative system. The devulcanization of rubber waste was achieved with varying amounts of DBD ranging from 0.4 to 13.8 wt% and temperatures from 150 to 200°C. The quality of vulcanizates and devulcanizates was evaluated by rheometer tests, temperature scanning stress relaxation measurements, and analysis of mechanical properties. During vulcanization, DBD acts as an accelerator in the presence of sulfur. When accelerators are added, the scorch time increases, and the cure rate decreases. Thus, DBD acts as a retarder. In the presence of activators, DBD leads to a significant reduction of crosslink density. This results in composites with high elongation at break and poor compression set values. The efficiency of the devulcanization of rubber waste depends strongly on DBD concentration and temperature. The monosulfidic crosslinks are cleaved by low concentrations of DBD, while polysulfidic crosslinks require higher concentrations. These results show that DBD is effective as a devulcanizing agent and degrades the network below 200°C. Abstract : The efficiency of the devulcanization of ethylene‐propylene‐diene monomer (EPDM) rubber waste using dibenzamido diphenyl disulfide (DBD) as peptizer depends strongly on the concentration of DBD and is able to be done at temperatures below 200 oC. The mild reaction conditions protect the polymer backbone, save energy during processing, and make rubber recycling attractive and suitable for new industrial rubber goods and composites.