Flexural behavior of composite sandwich beams with different kinds of GFRP ribs in flatwise and edgewise positions. (1st January 2019)

• Record Type: Journal Article
• Authors: Zhang, Fubin; Liu, Weiqing; Fang, Hai; Jia, Zhemin
• Is Part Of: Composites. Number 156(2019)
• Page Start: 229
• Page End: 239
• Publication Date: 2019-01-01
• Subjects: Composite sandwich beam -- GFRP ribs -- Flexural -- Stiffness -- Flatwise -- Edgewise; Composite materials -- Periodicals; Materials science -- Periodicals; Composite materials; Periodicals; Electronic journals; 620.118
• DOI: 10.1016/j.compositesb.2018.08.053
• Languages: English
• ISSNs: 1359-8368

Abstract

Abstract: This paper investigated the flexural behavior of composite sandwich beams, composed of glass fiber reinforced polymer (GFRP) skins and a polyurethane (PU) foam core with different kinds of GFRP ribs reinforcement, in flatwise and edgewise positions. The GFRP ribs, consisted of longitudinal, transverse and horizontal ribs, respectively, were embedded inside of the PU foam core. Twenty specimens were tested under four-point bending to verify the influence of the GFRP ribs and beam orientation on the bending stiffness, ultimate load bearing capacity, and failure modes of sandwich beams. It was found that changing the beam orientation from flatwise to edgewise change the beam failure mode from foam core shear failure to skin compressive failure. The sandwich beam's high stiffness and ultimate load bearing capacity can be efficiently utilized by placing them in edgewise position, and the longitudinal ribs played a major role on the bending stiffness and ultimate load bearing capacity compared with the transverse and horizontal ribs in flatwise position. Furthermore, an analytical model accounting for shear and flexural rigidities was proposed to predict the deflection and ultimate load bearing capacity of composite sandwich beams with different kinds of GFRP ribs in flatwise and edgewise positions. The analytical results were agreed well with test results.