Optimal design of water supply networks using an energy recovery approach. (March 2018)

• Record Type: Journal Article
• Authors: Meirelles Lima, Gustavo; Brentan, Bruno Melo; Luvizotto, Edevar
• Is Part Of: Renewable energy. Volume 117(2018)
• Page Start: 404
• Page End: 413
• Publication Date: 2018-03
• Subjects: Water distribution networks -- Pumps as turbines -- Energy recovery -- Energy efficiency -- Optimization; Renewable energy sources -- Periodicals; Power resources -- Periodicals; Énergies renouvelables -- Périodiques; Ressources énergétiques -- Périodiques; 333.794
• DOI: 10.1016/j.renene.2017.10.080
• Languages: English
• ISSNs: 0960-1481

Abstract

Abstract: Water Distribution Networks (WDNs) represent a major investment for water supply systems development. The standard procedure for their design is to search for the minimum cost, which is produced by the smaller diameters capable of maintaining the minimum required pressure. However, some District Metered Areas (DMAs) have a significant topographic elevation difference, and even if the minimum diameters are reached, the pressure remains high, and a Pressure Reducing Valve (PRV) is necessary. However, if the pipe diameters of the network are increased, distributed headloss will be reduced, and this additional energy will be locally dissipated in PRVs to maintain the pressure in the DMA below the maximum allowed value. If a turbine is installed instead, the dissipated energy can be used, creating a benefit that can justify the additional investment due to the diameter increment. Therefore, this paper presents a method for the optimal design of a WDN considering energy recovery. The use of Pumps as Turbines (PATs) is considered for energy production. The optimal design is obtained using a two-level optimization procedure: the first is used to obtain pipe diameters, and the second is used for PAT selection. Particle Swarm Optimization is used, and two case studies are presented. Highlights: An energy recovery approach for Water Distribution Networks design is proposed. The selection of a pump as turbine is made jointly with pipes selection. Pipes diameters are slightly increased to improve the energy production. The additional investment is surpassed by the benefits of the energy recovery.