Reducing formaldehyde emission of urea formaldehyde-bonded particleboard by addition of amines as formaldehyde scavenger. (September 2018)

• Record Type: Journal Article
• Authors: Ghani, Aizat; Ashaari, Zaidon; Bawon, Paiman; Lee, Seng Hua
• Is Part Of: Building and environment. Volume 142(2018)
• Page Start: 188
• Page End: 194
• Publication Date: 2018-09
• Subjects: Particleboard -- Formaldehyde catcher -- Methylamine -- Ethylamine -- Propylamine; Buildings -- Environmental engineering -- Periodicals; Building -- Research -- Periodicals; Constructions -- Technique de l'environnement -- Périodiques; Electronic journals; 696
• DOI: 10.1016/j.buildenv.2018.06.020
• Languages: English
• ISSNs: 0360-1323

Abstract

Abstract: Particleboard is one of the building materials that contribute to the emittance of formaldehyde in enclosed area. In order to reduce the formaldehyde emission from particleboard, amines were added into the urea formaldehyde (UF) resin as formaldehyde scavenger. The amines used were methylamine, ethylamine and propylamine. 0.5, 0.7 and 1% of each type of amine were added into UF resin and the mixtures were used to produce particleboard from rubberwood particles. The properties of the UF resin after addition of amines such as gelation time, viscosity, pH, free formaldehyde content and thermal stability were evaluated. The physical, mechanical properties and formaldehyde emission of the produced boards were also assessed. The results revealed that fully cured amine-containing UF resin possesses higher thermal stability compared to control UF resin. Amine-containing UF resin also had longer gelation time due to higher pH value. Nevertheless, both physical and mechanical properties of the resultant particleboard were negatively affected. Particleboard made from amine-containing UF resin had higher thickness swelling and water absorption. In addition, lower bending strength and internal bonding strength were also recorded. Insufficient pressing time for fully cured of resin might be the reason for such phenomenon. Particleboard with F*** emission level (0.5 ≤ x ≤ 1.5 mg/L) as specified in Japanese Industrial Standard (JIS) or European's E0 class equivalent were achieved when ethylamine and propylamine were added, regardless of dosage used. This study showed the feasibility of using amines as formaldehyde scavenger. However, optimisation of processing parameters is needed to enhance the physico-mechanical properties of the particleboard. Highlights: Amines were added as formaldehyde scavenger for UF-bonded particleboard. Gelation time of amine-containing UF resin increased due to increasing pH value. Physical and mechanical properties of particleboard were adversely affected. Formaldehyde emission of particleboard reduced after addition of amines.