Flexural fracture mechanisms and fatigue behaviors of Bi4Ti3O12-based high-temperature piezoceramics sintered at different temperatures. Issue 14 (1st October 2018)

• Record Type: Journal Article
• Authors: Xie, Shaoxiong; Xu, Jiageng; Chen, Yu; Tan, Zhi; Nie, Rui; Wang, Qingyuan; Zhu, Jianguo
• Is Part Of: Ceramics international. Volume 44:Issue 14(2018)
• Page Start: 16758
• Page End: 16765
• Publication Date: 2018-10-01
• Subjects: Bi4Ti3O12 ceramics -- Microstructures -- Fracture mechanisms -- Fatigue behaviors; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2018.06.107
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: In this paper, a series of Aurivillius phase Bi4 Ti2.95 W0.05 O12.05 + 0.2 wt% Cr2 O3 (ab. BTWC) ceramics were prepared by a solid-reaction process and sintered at different temperatures (1050 ℃~1150 ℃), their microstructures, fracture mechanisms and fatigue behaviors were investigated under three-point-bending mode. The results show that the grain size of BTWC ceramics increases with increasing the sintering temperature. The typical transgranular mode dominates the fracture behavior of the samples sintered at lower temperatures, while the intergranular fracture can be also observed in the samples sintered at higher temperatures. Besides, the storage modulus ( E' ) and mechanical loss (tanm δ ) of BTWC ceramics have a subtle variation with the increase of sintering temperature. In addition, the high-temperature environment could not only decrease the fracture toughness and bending strength of ceramics but also change their fracture mode. On the other hand, the bending strength also decreases with the decrease of loading rates, which could be attributed to the slow crack growth referring to the dynamic fatigue behavior of brittle materials. The slow crack growth parameter ( n ) of BTWC ceramics shows a downtrend with increasing their sintering temperature, indicating that those high temperature sintering samples possess a higher susceptibility when subjected to the long-term stress corrosion. Furthermore, the sample sintered at 1125 ℃ exhibits an excellent fatigue resistance when subjected to the cyclic stress. The corresponding fatigue mechanism is not only related to the ferroelectric domain configuration but also involved with the pores or impurities.