Effect of sawdust addition on the mechanical and water absorption properties of banana-sisal/epoxy natural fiber composites. (2022)

• Record Type: Journal Article
• Authors: Kumari, Niharika; Paswan, Manikant; Prasad, K.
• Is Part Of: Materials today. Volume 49:Part 5(2022)
• Page Start: 1719
• Page End: 1722
• Publication Date: 2022
• Subjects: Banana fiber -- Sisal fiber -- Saw dust -- Epoxy resin -- Mechanical properties; Materials science -- Congresses -- Periodicals; 620.1
• DOI: 10.1016/j.matpr.2021.07.489
• Languages: English
• ISSNs: 2214-7853

Abstract

Abstract: In this work, the hybrid natural fiber composites (NFCs) were prepared using a standard hand lay-up technique from Banana fiber (B), Sisal fiber (S), and sawdust (SD) with different compositions viz. S-I (B 60%–S 20%–SD 20%), S-II (B 80%–S 5%–SD 15%) and, S-III (B 80%–S 15%–SD 5%) bounded with 80% epoxy resin LY556 and hardener LY953 in the 4:1 ratio as per ASTM standards. All the specimens were made with proper composition of 20 wt% of reinforcing materials and 80 wt% of the matrix material. The mechanical (tensile strength, compressive strength, flexural strength, and impact strength) properties and Brinell hardness of prepared specimens were conducted according to ASTM standards. The tensile, compressive, flexural, and impact strength, as well as Brinell hardness of the prepared NFCs, were found to increase with the increase in sawdust content in the epoxy matrix. Further, an improvement in the water absorption property was registered with the increment of sawdust content in the banana-sisal/epoxy composite. The value of dielectric permittivity increased while that of tangent loss decreased with increasing sawdust content. The improved mechanical, dielectric as well as water absorption properties and better Brinell hardness, foreshadow the industrial promises of the present NFCs a better alternative for synthetic fiber-reinforced composite materials.