Mechanical stiffness prediction of beam-to-column stiffened angle joints. (May 2020)

• Record Type: Journal Article
• Authors: Reinosa, J.M.; Loureiro, A.; Gutierrez, R.; Lopez, M.
• Is Part Of: Journal of constructional steel research. Volume 168(2020)
• Publication Date: 2020-05
• Subjects: Angle joints -- Rotational stiffness -- Semi-rigid joints -- Experimental study; Steel, Structural -- Periodicals; Building, Iron and steel -- Periodicals; Acier de construction -- Périodiques; Construction métallique -- Périodiques; 624.1821
• DOI: 10.1016/j.jcsr.2019.105875
• Languages: English
• ISSNs: 0143-974X

Abstract

Abstract: Semi-rigid angle joints, in their different configurations, constitute a highly interesting alternative to other typologies like end plate joints. However, they are not widely used in the customary practice of European steel construction. The assembly of these joints is simple and cost effective, and they are a good choice in deconstruction and seismic designs. The stiffness of cleat angle joints can be increased either by preloading the bolts or by adding stiffeners to the angles. The development of theoretical models to evaluate both the stiffness and the resistance of these joints depends essentially on the existence of sufficient experimental evidence to validate them. Although there is already a reasonable number of tests on semi-rigid angle joints, this is not so in the case of joints with stiffened angles. Therefore, this study displays the results of experiments consisting of eight tests on stiffened angle joints. Moreover, an analytical model to predict the rotational stiffness, based on the Eurocode 3 Component Method according to a non-aligned model, is proposed. In this approach, a previously developed plate model is introduced to assess the axial stiffness of the top angle in bending. In addition, a new component that takes into account the stiffener in compression is presented. The proposed methodology is successfully validated with tests from the experimental work, as well as with previous tests from other researchers. Highlights: Eight tests on stiffened angle joints are presented. A new methodology to predict the rotational stiffness is proposed. The component stiffener in compression is considered and included. The proposal is successfully validated with own and other authors' tests.