A novel balanced‐to‐unbalanced branch‐line coupler with large power division ratio. Issue 2 (22nd October 2021)

• Record Type: Journal Article
• Authors: Zhu, Zihui; Wang, Zhongbao; Han, Peng; Liu, Hongmei; Fang, Shaojun
• Is Part Of: International journal of RF and microwave computer-aided engineering. Volume 32:Issue 2(2022)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2021-10-22
• Subjects: balanced to unbalanced coupler -- large power division ratio -- without high‐impedance transmission lines; Microwave devices -- Computer-aided design -- Periodicals; Computer-aided engineering -- Periodicals; 621.3813
• DOI: 10.1002/mmce.22952
• Languages: English
• ISSNs: 1096-4290

Abstract

Abstract: A novel balanced‐to‐unbalanced branch‐line coupler with a large power division ratio (PDR) is proposed in this paper. The proposed coupler consists of six transmission‐line sections, which can be easily synthesized with the prescribed PDR. By changing the electrical lengths of two transmission lines, a large PDR range can be obtained without the use of high‐impedance transmission lines. The closed‐form design equations are provided and discussed. To verify the proposed circuit, a coupler prototype with the PDR of 20 dB and the center frequency of f 0 = 1.0 GHz is designed and fabricated. Simulation and measurement results are in good agreement. When the balanced port A is excited, the measured differential‐mode to single‐ended transmission coefficients at f 0 for the unbalanced ports D and C are | S sdDA | = −0.28 dB and | S sdCA | = −20.02 dB, respectively, which meet the desired PDR. The measured | S ddAA | at f 0 is −33.6 dB with a −10‐dB bandwidth of about 12.7% from 0.933 to 1.059 GHz. The | S scDA | and | S scCA | are less than −29.5 dB with a −18‐dB bandwidth of 22.4% from 0.924 to 1.157 GHz.