Experimental validation of an organic rankine-vapor compression cooling cycle using low GWP refrigerant R1234ze(E). (1st February 2022)

• Record Type: Journal Article
• Authors: Grauberger, Alex; Young, Derek; Bandhauer, Todd
• Is Part Of: Applied energy. Volume 307(2022)
• Publication Date: 2022-02-01
• Subjects: Organic Rankine Cycle -- Vapor Compression Cycle -- Waste Heat Recovery -- Experimental Investigation; Power (Mechanics) -- Periodicals; Energy conservation -- Periodicals; Energy conversion -- Periodicals; 621.042
• DOI: 10.1016/j.apenergy.2021.118242
• Languages: English
• ISSNs: 0306-2619

Abstract

Highlights: Thermodynamic Organic Rankine-Vapor Compression cycle model. Prototype demonstration of a large-scale Organic Rankine-Vapor Compression system. Heat exchanger and turbomachinery performance validation. Thermal and electric COP competitive with commercial systems. Abstract: There is a significant global opportunity to capture and utilize low grade waste heat to reduce fossil fuel consumption, greenhouse gas emissions, and improve energy efficiency across a wide range of industries. In this work, an advanced type of thermally activated cooling system, an organic Rankine-vapor compression cycle (ORVC) with novel heat integration strategies, was designed and tested at a relevant scale for industrial waste heat recovery (300 kWth cooling capacity). The ORVC linked an organic Rankine power cycle and a vapor compression cooling cycle using a turbine and compressor that shared a single shaft. The ORVC test facility absorbed waste heat from a liquid stream at 91℃ to simulate engine coolant in diesel generator sets, rejected heat to a glycol stream at 30 ℃, and generated chilled water at 7 ℃. A cooling capacity of 264 kW ± 3.5 kW was experimentally validated with a COP of 0.56 ± 0.01 during steady-state operation at the design temperatures. The thermal efficiency, accounting for pump work, of the Rankine cycle was 7.7% ± 0.22% and the COP of the vapor compression cycle was 5.25 ± 0.09. The centrifugal turbo-compressor operated at 31.5 kRPM ± 0.3 kRPM, with a turbine and compressor isentropic efficiencies of 76.7% ± 0.90% and 84.8% ± 0.54%, respectively, with near-perfect power transmission between these components. The pressure drop in the piping and heat exchangers were significantly larger than expected which had a detrimental impact on the performance of the ORVC. In addition, the condenser on the cooling cycle could not deliver the subcooling as specified from the design point modeling. The results from the sensitivity analysis showed that the higher condenser glycol outlet temperature had the largest impact on performance, which is consistent with other analytical models in the literature. When the ORVC simulations were updated with experimental values for isentropic efficiencies of the turbomachinery, the thermal COP was 0.66 which represents an estimate of the predicted performance if test facility limitations are overcome.