Research on the effects of surface modification of ceramic powder on cure performance during digital light processing (DLP). Issue 3 (1st February 2022)

• Record Type: Journal Article
• Authors: Li, Yanhui; Huang, Shengwu; Wang, Shengliang; Zhang, Xinyue; Wang, Yueliang; Lu, Binwen; Luo, Yonghao; He, Fupo; Liu, Wei; Wu, Shanghua
• Is Part Of: Ceramics international. Volume 48:Issue 3(2022)
• Page Start: 3652
• Page End: 3658
• Publication Date: 2022-02-01
• Subjects: Nitrides powders -- Optical properties -- Oxidation -- Cure performance; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2021.10.146
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: Digital light processing (DLP) is one of the most important additive manufacture technologies to fabricate ceramic parts with complex geometries. Compared with pure photosensitive resin, the cure performance of ceramic suspensions is obviously different due to the optical property change after the addition of ceramic powders. In this paper, a unique oxidation process was used to modify the optical properties of nitride powders including AlN and Si3 N4 . The properties of oxidized ceramics were investigated and the cure performance of ceramic suspensions was then characterized. The effect of oxidation time on cure performance was evaluated. The results showed that for AlN, oxidation process leads to the smaller cure depth and smaller excess cure width as compared with non-oxidized AlN and for Si3 N4, oxidation process leads to the larger cure depth and larger excess cure width as compared with non-oxidized Si3 N4, indicating that both refractive index and light absorbance of ceramic powders have obvious effects on cure behaviors. Additionally, the cure behavior of oxidized ceramic suspension in this study shows that the relationship of cure depth vs. incident energy agrees well with Beer- Lambert model, but the excess cure width vs. incident energy is not consistent with quasi Beer-Lambert model due to the nature of digital micromirror device (DMD).