Cut-corner prism piezoelectric energy harvester based on galloping enhancement mechanism. (November 2021)

• Record Type: Journal Article
• Authors: Wang, Weizhe; Huang, Jian; Yao, Zhaohui
• Is Part Of: Energy reports. Volume 7(2021)
• Page Start: 6366
• Page End: 6374
• Publication Date: 2021-11
• Subjects: Galloping enhancement -- Piezoelectric energy harvester -- Cut-corner prism -- Shear layer -- Secondary backflow; Power resources -- Periodicals; Energy industries -- Periodicals; Power resources; Periodicals; Electronic journals; 621.04205
• DOI: 10.1016/j.egyr.2021.09.081
• Languages: English
• ISSNs: 2352-4847

Abstract

Abstract: To improve the efficiency of harvesting energy, a cut-corner prism piezoelectric energy harvester based on galloping enhancement is designed in this study. Galloping is caused by the pressure difference between the upper and lower surfaces of the prism. Numerical simulations indicate that the cut-corner can reduce the occurrence of the shear layer reattachment phenomenon and also increase the strength of the secondary backflow between the shear layer and the lateral side of the prism, thereby raising the pressure difference between the upper and lower surfaces of the prism. The effect of cut-corner size on the performance of cut-corner prism energy harvesters is investigated experimentally. The results show that the optimal range for the prism is when the lengths of the cut-corner windward side and parallel side are 0.2B–0.4B (B is the length of the prism side) and 0.5B–0.6B, respectively. At a wind speed of 6.24 m/s and a resistance of 1 × 10 5 Ω, the maximum output power of the cut-corner prism energy harvester with a windward side length of 0.4B and a parallel side length of 0.6B can reach 47.5 mW, which is 261% higher than that of the reference square prism, effectively raising the performance of the piezoelectric energy harvester. Highlights: A cut-corner prism is designed based on a galloping enhancement mechanism. Cut-corner reduces shear layer reattachment and raises strength of secondary flow. Cut-corner size has a great influence on the performance of energy harvesters. Maximum output power of cut-corner prism is increased 261% compared to square prism.