Defect detection in guided wave signals using nonlinear autoregressive exogenous method. (May 2022) - Wang, Kangwei
To perform long-term structural health monitoring, a method based on a nonlinear autoregressive exogenous network is used to learn the features present in signals acquired from a pristine structure. When a subsequent measured signal is input to the trained nonlinear autoregressive exogenous network, the output is a prediction of the equivalent signal from a pristine structure. The residual when the pristine predicted signal is subtracted from the measured signal is used for defect detection and localization. A methodology of how to train, test and assess a nonlinear autoregressive exogenous network for guided wave signals is introduced and applied to experimental data obtained over a period of 8 years from a sparse array of guided wave sensors deployed on a steel storage tank. A separate nonlinear autoregressive exogenous model is trained for each sensor pair in the array using data captured in 2012. The method is first tested using data from a single pair of sensors. Defect signals are synthesized by superposing simulated responses from defects onto later experimental signals obtained from the real structure. The test results for the nonlinear autoregressive exogenous method show better detection performance than those from the optimal baseline selection method, in terms of receiver operating characteristic curves. The detection performance of the nonlinear autoregressive exogenous method is further assessed on signals from the whole sensor array, again with simulated defect responses superposed. It is shown that good detection and localization performance can be achieved by combining the nonlinear autoregressive exogenous residual signals from different sensor pairs. The nonlinear autoregressive exogenous method is tested on experimental data acquired at intervals over the following 7 years as the condition of the tank naturally degrades. Indications from localized corrosion are observed. Finally, an artificial localized anomaly is added to the tank and is visible at the correct location in the image formed using the nonlinear autoregressive exogenous method.