Finding the optimum groin layout for the Konaweha river banks protection via 2D numerical modeling. Issue 1 (December 2021)

• Record Type: Journal Article
• Authors: Zulfan, J; Ginting, B M; Hidayat, M N; Rimawan, R
• Is Part Of: IOP conference series. Volume 930:Issue 1(2021)
• Publication Date: 2021-12
• Subjects: numerical modeling -- protection -- river banks -- stability; Earth sciences -- Periodicals; Environmental sciences -- Congresses; Environmental sciences -- Periodicals; 550.5
• DOI: 10.1088/1755-1315/930/1/012031
• Languages: English
• ISSNs: 1755-1307

Abstract

Abstract: River bank erosion has become a critical issue, especially for river bends with an alluvial soil type. Mostly, river bank erosions have caused structural failures because many national roads in Indonesia are placed near the river bend areas. Groins can reduce flow velocity, thereby increasing riverbank stability. However, most groins were installed in the river without impacting the river flow due to the improper design. This paper analyzes the use of groins placed at the river bend of the Konaweha River to protect the river bank with a length of 250 m from erosion. The evaluation employs 2D numerical modeling using MIKE21 FM to observe the influence of the groin on the river velocity, flow distribution pattern, and water level. Sixteen model scenarios with four groin configurations were tested for 25-year discharge, 2-year discharge, normal discharge 600 m 3 /s, and low discharge 197 m 3 /s to achieve the most effective plan. Based on the simulation results, Scenarios with five groins are recommended to reduce the flow velocity along the outer river bank from 2 to 0.3 m/s, thus minimizing the erosion. In addition, the spacing of groins being twice the groin length is recommended.