Use of Bentonite and Organic Binders in the Briquetting of Particulate Residues from the Midrex Process for Improving the Thermal Stability and Reducibility of the Briquettes. Issue 11 (5th August 2021)

• Record Type: Journal Article
• Authors: Lohmeier, Laura; Thaler, Christoph; Harris, Christopher; Wollenberg, Ralf; Schröder, Hans-Werner; Braeuer, Andreas Siegfried
• Is Part Of: Steel research international. Volume 92:Issue 11(2021)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2021-08-05
• Subjects: bentonite -- briquetting -- Midrex process -- organic binders -- residues; Steel -- Periodicals; Steel -- Metallurgy -- Periodicals; 669.142
• DOI: 10.1002/srin.202100210
• Languages: English
• ISSNs: 1611-3683

Abstract

Abstract : With the aim of achieving sufficient reducibility and thermal stability of briquettes for reuse as feedstock in the Midrex direct reduction process, a defined mixture of residues from the Midrex process is briquetted with an organic binder and bentonite. In the first step, briquetting tests are conducted to investigate the influence of water and binder content on the mechanical properties of the briquettes. Suitable briquettes are then used for reduction tests, where mechanical properties under Midrex‐relevant conditions are considered. The tests show that briquettes with an organic binder (with and without bentonite) are not stable under Midrex‐relevant conditions, whereas briquettes with a mixture composition with 5 wt% bentonite and 5 wt% water are. This can be justified on the basis of microscopic images. Bentonite favors the sintering mechanisms occurring between the particles. The organic binders decompose thermally and carbon remains, which prevents sintering. The reduction tests show that oxygen release from the briquettes occurs more slowly than for iron oxide pellets. However, the residual mixture already contains reduced material (Femet of briquettes with bentonite 28.1 wt%), so less oxygen has to be removed. Furthermore, a small briquette format (volume 10 cm 3 ) shows better reduction behavior compared to bigger briquettes. Abstract : During the production of direct reduced iron using the Midrex process, iron‐containing, fine‐grained residues are produced. To avoid disposal, a way of briquetting the residues with organic and inorganic binder and returning the briquettes to the Midrex direct reduction process is demonstrated. Laboratory‐scale briquetting experiments and reducibility tests are presented.