Estimating the error in filament propagation measurement using a synthetic probe. (9th November 2021)

• Record Type: Journal Article
• Authors: Shanahan, B; Killer, C; Pechstein, G; Henneberg, S A; Fuchert, G; Grulke, O
• Is Part Of: Plasma physics and controlled fusion. Volume 63:Number 12(2021)
• Publication Date: 2021-11-09
• Subjects: probe -- edge transport -- filament transport -- blob transport -- synthetic diagnostic; Plasma (Ionized gases) -- Periodicals; Controlled fusion -- Periodicals; 530.44
• DOI: 10.1088/1361-6587/ac2ff7
• Languages: English
• ISSNs: 0741-3335

Abstract

Abstract: Electric probe arrangements are a standard tool for investigating plasma filaments in the scrape-off layer of magnetic fusion experiments. In the Wendelstein 7-X stellarator, recent work has characterized plasma filaments using reciprocating electric probes and provided a comparison of filament scaling to simulated filaments, showing remarkable agreement (Killer et al 2020 Plasma Phys. Control. Fusion 62 085003). Here, such simulations are further employed to assess uncertainties inherent to probe measurements by introducing a synthetic probe diagnostic into the simulation. It is determined that filament diameters, and to a smaller degree radial filament velocities, are inherently underestimated in experiment when a filament is not centered on the probe tip. Filament velocity measurements are also sensitive to the alignment of the probes relative to the poloidal direction and the distance between pins. Floating potential pins which are spaced too far apart will underestimate filament velocity, whereas pins which are closely-spaced can overestimate the filament velocity. The sensitivity of the floating potential measurements—from which radial velocity is extracted—to temperature fluctuations is discussed. These investigations apply to measurements of filaments by electric probes in tokamaks as well and may serve as guidance for interpreting probe data and designing probe arrays.