Scalable Synthesis of Microsized, Nanocrystalline Zn0.9Fe0.1O‐C Secondary Particles and Their Use in Zn0.9Fe0.1O‐C/LiNi0.5Mn1.5O4 Lithium‐Ion Full Cells. Issue 13 (27th May 2020)

• Record Type: Journal Article
• Authors: Asenbauer, Jakob; Binder, Joachim R.; Mueller, Franziska; Kuenzel, Matthias; Geiger, Dorin; Kaiser, Ute; Passerini, Stefano; Bresser, Dominic
• Is Part Of: ChemSusChem. Volume 13:Issue 13(2020)
• Page Start: 3504
• Page End: 3513
• Publication Date: 2020-05-27
• Subjects: electrochemistry -- conversion/alloying materials -- lithium-ion batteries -- particle design -- spray-drying; Green chemistry -- Periodicals; Sustainable engineering -- Periodicals; Chemistry -- Periodicals; Chemical engineering -- Periodicals; 660
• DOI: 10.1002/cssc.202000559
• Languages: English
• ISSNs: 1864-5631

Abstract

Abstract: Conversion/alloying materials (CAMs) are a potential alternative to graphite as Li‐ion anodes, especially for high‐power performance. The so far most investigated CAM is carbon‐coated Zn0.9 Fe0.1 O, which provides very high specific capacity of more than 900 mAh g −1 and good rate capability. Especially for the latter the optimal particle size is in the nanometer regime. However, this leads to limited electrode packing densities and safety issues in large‐scale handling and processing. Herein, a new synthesis route including three spray‐drying steps that results in the formation of microsized, spherical secondary particles is reported. The resulting particles with sizes of 10–15 μm are composed of carbon‐coated Zn0.9 Fe0.1 O nanocrystals with an average diameter of approximately 30–40 nm. The carbon coating ensures fast electron transport in the secondary particles and, thus, high rate capability of the resulting electrodes. Coupling partially prelithiated, carbon‐coated Zn0.9 Fe0.1 O anodes with LiNi0.5 Mn1.5 O4 cathodes results in cobalt‐free Li‐ion cells delivering a specific energy of up to 284 Wh kg −1 (at 1 C rate) and power of 1105 W kg −1 (at 3 C) with remarkable energy efficiency (>93 % at 1 C and 91.8 % at 3 C). Abstract : CAM anodes : A new, scaled‐up synthetic route including three spray‐drying steps that results in the formation of microsized secondary particles of carbon‐coated Zn0.9 Fe0.1 O composed of nanocrystalline particles is described. This conversion/alloying material (CAM) provides very good electrochemical performance in Li‐ion half‐cells, and combination with LiNi0.5 Mn1.5 O4 (LNMO) cathodes results in Li‐ion cells showing remarkably high energy efficiency.