Effect of integrated copper pad on the performance of boiling-driven wickless thermal ground plane. (25th November 2021)

• Record Type: Journal Article
• Authors: Moon, Joo Hyun; Wang, Xiaomeng; Fadda, Dani; Shin, Dong Hwan; Lee, Jungho; You, Seung M.
• Is Part Of: Applied thermal engineering. Volume 199(2021)
• Publication Date: 2021-11-25
• Subjects: Heat Spreading -- Thermal Ground Plane -- Wickless -- Boiling-Driven -- Orientation-Independent; Heat engineering -- Periodicals; Heating -- Equipment and supplies -- Periodicals; Periodicals; 621.40205
• DOI: 10.1016/j.applthermaleng.2021.117595
• Languages: English
• ISSNs: 1359-4311

Abstract

Highlights: A high-capacity thermal ground plane (TGP) with an integrated copper pad is developed. Critical heat flux in high temperature conductive microporous coating is increased. Dryout heat flux amplified in the flat and wickless TGP with the integrated copper pad. Performance of the TGP with the copper pad remains orientation-independent. Abstract: A solid copper pad is integrated into the heating side of a wickless copper thermal ground plane (TGP) with deionized water as the working fluid. Experimental TGP performance tests, along with pool boiling experiments and conduction thermal numerical simulations, are used to quantify the effect of the copper pad thickness on the overall thermal performance of the TGP. Even though adding the copper pad weakens the effective thermal conductivity of the TGP slightly, it improves the dryout within the TGP and allows operation at up to 1.6 times higher heat flux value. Boiling inside the TGP yields a reduced boiling heat transfer coefficient in the narrow gap, coupled with a higher dryout point due to the bubble-induced flow inside the TGP. The effective thermal conductivity remains 1.5 to 1.8 times higher than that of plain copper, and the weight of the TGP is approximately 60% of the weight of a solid copper block of the same size. The TGP is orientation-independent regardless of the pad thickness and water amounts.