Specific energy cost for nitrogen fixation as NOx using DC glow discharge in air. (11th November 2019)

• Record Type: Journal Article
• Authors: Pei, Xuekai; Gidon, Dogan; Graves, David B
• Is Part Of: Journal of physics. Volume 53:Number 4(2020)
• Publication Date: 2019-11-11
• Subjects: nitrogen fixation -- atmospheric pressure air plasma -- NOx production -- energy cost; Physics -- Periodicals; 530
• DOI: 10.1088/1361-6463/ab5095
• Languages: English
• ISSNs: 0022-3727

Abstract

Abstract: We report on factors influencing the specific energy costs of producing NO x from pin-to-pin DC glow discharges in air at atmospheric pressure. Discharge current, gap distance, gas flowrate, exterior tube wall temperature and the presence and position of activated Al2 O3 catalyst powder were examined. The presence of heated catalyst adjacent to the plasma zone improved energy efficiency by as much as 20% at low flows, but the most energy efficient conditions were found at the highest flowrates that allowed a stable discharge (about 10–15 l min −1 ). Under these conditions, the catalyst had no effect on efficiency in the present study. The lowest specific energy cost was observed to be between about 200–250 GJ/tN. The transport of active chemical species and energy are likely key factors controlling the specific energy costs of NO x production in the presence of a catalyst. Air plasma device design and operating conditions must ensure that plasma-generated active intermediate chemical species transport is optimally coupled with catalytically active surfaces.