An experimental performance comparison of Newtonian and non-Newtonian fluids on a centrifugal blood pump. (March 2022)

• Record Type: Journal Article
• Authors: Onder, Ahmet; Yapici, Rafet; Incebay, Omer
• Is Part Of: Proceedings of the Institution of Mechanical Engineers. Volume 236:Number 3(2022)
• Page Start: 399
• Page End: 405
• Publication Date: 2022-03
• Subjects: Aqueous xanthan gum solution -- centrifugal blood pump -- hydraulic efficiency -- head curve -- non-Newtonian fluid; Biomedical engineering -- Periodicals; Medical instruments and apparatus -- Periodicals; 610.28
• DOI: 10.1177/09544119211057626
• Languages: English
• ISSNs: 0954-4119

Abstract

The use of substitute fluid with similar rheological properties instead of blood is important due to ethical concerns and high blood volume consumption in pump performance test before clinical applications. The performance of a centrifugal blood pump with hydrodynamic journal bearing is experimentally tested using Newtonian 40% aqueous glycerin solution (GS) and non-Newtonian aqueous xanthan gum solution of 600 ppm (XGS) as working fluids. Experiments are performed at four different rotational speeds which are 2700, 3000, 3300, and 3600 rpm; experiments using GS reach between 8.5% and 37.2% higher head curve than experiments using the XGS for every rotational speed. It was observed that as the rotational speed and flow rate increase, the head curve difference between GS and XGS decreases. This result can be attributed to the friction reduction effect when using XGS in experiments at high rotation speed and high flow rate. Moreover, due to different fluid viscosities, differences in hydraulic efficiency were observed for both fluids. This study reveals that the use of Newtonian fluids as working fluids is not sufficient to determine the actual performance of a blood pump, and the performance effects of non-Newtonian fluids are remarkably important in pump performance optimizations.