Spray and combustion characteristics of butanol-diesel and hexanol-diesel blends under high-altitude conditions. (1st January 2022)

• Record Type: Journal Article
• Authors: Yan, Junhao; Gao, Suya; Zhao, Weihua; Lee, Timothy H.
• Is Part Of: Fuel. Volume 307(2022)
• Publication Date: 2022-01-01
• Subjects: Butanol-diesel blend -- Hexanol-diesel blend -- Flame lift-off length -- Reacting spray -- Soot; Fuel -- Periodicals; Coal -- Periodicals; Coal; Fuel; Periodicals; 662.6
• DOI: 10.1016/j.fuel.2021.121753
• Languages: English
• ISSNs: 0016-2361

Abstract

Highlights: Spray and combustion characteristics of diesel and blended fuels were studied. Butanol-diesel and hexanol-diesel blends with 20% mixing ratio were examined. Adding hexanol had less impact on combustion characteristics than butanol addition. B20 and H20 both showed less flame luminosity than diesel. Hexanol could effectively inhabit soot formation and accelerate soot oxidation. Abstract: Due to their excellent fuel properties, butanol and hexanol are considered as two promising renewable fuels for diesel engine applications. The objective of this work is to investigate and compare the spray and combustion characteristics of butanol-diesel and hexanol-diesel blends under high-altitude conditions. A constant volume combustion chamber was used to provide the desired environment. Experiments were conducted under various ambient temperatures ranging from 800 K to 1200 K and various ambient densities ranging from 11 kg/m 3 to 15 kg/m 3 . Fuel blends with 20% blend ratio (B20 and H20) and neat diesel were used as test fuels. The spray and combustion characteristics of the test fuels were analyzed using measured liquid penetration length, ignition delay, combustion duration, flame lift-off length (FLoL), and spatially integrated natural luminosity (SINL). Results revealed that B20 and H20 had shorter liquid penetration length than diesel under low ambient temperature and density conditions due to their higher volatility. The blended fuels showed significantly longer ignition delay than diesel under low ambient temperature conditions, but it could be overcome by increasing the ambient temperature. Adding butanol and hexanol into diesel both extended FLoL especially under low ambient temperature and density conditions, but the effects of hexanol was less dramatic compared to butanol due to its lower latent heat of vaporization and higher chemical reactivity. Both B20 and H20 showed lower SINL than diesel under any conditions, indicating their ability of reducing soot emissions. However, no apparent differences could be found between these two fuels until the ambient temperature dropped to 800 K.