Use of an industrial solid waste as a pigment in clay bricks and its effects on the mechanical properties. (1st November 2021)

• Record Type: Journal Article
• Authors: Bautista-Marín, J.D.; Esguerra-Arce, A.; Esguerra-Arce, J.
• Is Part Of: Construction & building materials. Volume 306(2021)
• Publication Date: 2021-11-01
• Subjects: Mill scale -- Steel industry byproduct -- Building bricks -- Pigment -- Gray hematite; Building materials -- Periodicals; 624.18
• DOI: 10.1016/j.conbuildmat.2021.124848
• Languages: English
• ISSNs: 0950-0618

Abstract

Highlights: Mill scale can be used as pigment in fired bricks. The addition of mill scale to clay bricks is a way to reuse an industrial by-product. The bricks with added mill scale comply water absorption and porosity. Flexural resistance for bricks with added mill scale comply with minimum standards. Abstract: The addition of mill scale, an important steel making byproduct, as pigment to fired clay bricks was investigated, as well as its effects on the physical, mechanical and microstructural properties. For this purpose, bricks were manufactured using clay from the Cundiboyacense highlands -a geographic region of Colombia- with the addition of mill scale at 0, 5, 10 and 15%. Once the bricks had been sintered, their density, porosity, water absorption, compressive and flexural resistance were measured. In addition, microstructural analysis using X-ray diffraction, as well as thermogravimetric analysis and differential scanning calorimetry analyses, were carried out on the four types of bricks, to facilitate comparison between them. Variations in hue between the four types of bricks, from dull orange to grayish red, an average decrease in flexural strength of 33% and an increase in average porosity of 4% compared to traditional bricks were observed. Furthermore, it was found that the added mill scale does not react chemically with the clay, being a stable addition. Additionally, mill scale oxidizes to hematite during the firing of the bricks, ultimately becoming a good pigment that changes its hue depending on the added quantity. Therefore, it was concluded that the addition of mill scale to bricks enables the reuse of this industrial by-product and reduces the consumption of clay (which is a non-renewable resource), while complying with minimum standards of compressive strength, flexural strength and porosity.