Multi-Robot Multi-Station Cooperative Spot Welding Task Allocation Based on Stepwise Optimization: An Industrial Case Study. (February 2022)

• Record Type: Journal Article
• Authors: Zhou, Bo; Zhou, Rui; Gan, Yahui; Fang, Fang; Mao, Yujie
• Is Part Of: Robotics and computer-integrated manufacturing. Volume 73(2022)
• Publication Date: 2022-02
• Subjects: Industrial robot -- Genetic algorithm -- Task allocation -- Hierarchical optimization; Robots, Industrial -- Periodicals; Computer integrated manufacturing systems -- Periodicals; Robotics -- Periodicals; Robots industriels -- Périodiques; Productique -- Périodiques; Robotique -- Périodiques; 670.285
• DOI: 10.1016/j.rcim.2021.102197
• Languages: English
• ISSNs: 0736-5845

Abstract

Highlights: The main contributions of our method are as follows: ○ At present, there are few studies related to MR-MSTA problem. In this paper, from an actual car-door spot welding case in a factory, a specific MR-MSTA optimization problem was abstracted. To solve the complex MR-MSTA problem, a general optimization model was built to improve the adaptability and feasibility of correlation algorithm in the practical application. ○ The multi-robot multi-station task allocation algorithm based on stepwise optimization (SO-MRMSTA) was proposed for the complex optimization model of MR-MSTA problem. MR-MSTA was divided into three-layer problems: single robot trajectory planning, multi-robot task assignment of welding spots, and multi-station assignment of welding spots, which decouples the problem and makes it easier to solve. ○ The region assignment method was proposed for multi-robot task assignment. The working space was divided into several regions and assigned to each robot by dividing line, which simplifies the model and eliminates the accessibility and collision constraint. The proposed method is easier to carry out in real industry and saves a lot of computation time and space. The rest of this article is organized as follows. The second section describes the MR-MSTA problem and the basic model. The third section proposes the stepwise optimization method. Section 4 studies the experimental results and verifies the effectiveness of the proposed method. Finally, Section 5 gives the conclusions. Abstract: The complicated task allocation, scheduling and planning problem with multiple stations and multiple robots commonly seen in spot welding production line design is studied in this paper. To deal with the highly coupled model combined with several task planning sub-problems, including robot cells design, robots allocation among cells, welding allocation among cells and robots, and welding scheduling for each robot, as well as numerous internal and external constraints, the traditional multi-robot task allocation (MRTA) framework is extended to a novel and uniform multi-station multi-robot (MS-MRTA) framework, and a sophisticated hierarchical optimization algorithm is proposed. Firstly, to establish the optimization model based on MS-MRTA framework as a whole, constraints such as reachability constraint, maximum speed and acceleration constraint, collision constraint and welding operation time constraint are considered, and the optimization objective is established based on the balance of welding tasks of each robot and each cell. Then, in order to solve the highly coupled model, a hierarchical optimization algorithm is proposed to divide the problem into three layers from top to bottom: the path planning of a single robot, welding task allocation among robots, and welding task allocation among cells. The path planning of a single robot is analogous to the Travelling Salesman Problem (TSP) solved by iterating the Lin-Kernighan-Helsgaun (LKH) solver with the trapezoidal acceleration and deceleration motion. To solve the welding task allocation among robots with numerous constraints, a regional assignment method was proposed which simplify the model and eliminate the accessibility constraint and collision constraint, and combined with genetic algorithm to solve the sub-problem iteratively. The welding task allocation among cells is solved based on the principle of balanced welding of each cell. Genetic algorithm is used to obtain the nested iterative solution of three sub-problems. The cases of actual door welding tasks are studied to verify the effectiveness of the proposed optimization algorithm. Compared with the method of long-term trial and error by experienced experts and two other more advanced algorithms, the proposed optimization algorithm results in a task assignment scheme with less welding time, less waiting time and an increase of welding operation productivity, which shows the effectiveness and feasibility of the multi-robot multi-station task allocation algorithm based on stepwise optimization.