Experimental validation of a quasi-transient coupling approach for the modeling of heat transfer in autoclave processing. (March 2022)

• Record Type: Journal Article
• Authors: Zhu, Junhong; Frerich, Tim; Dimassi, Adli; Koerdt, Michael; Herrmann, Axel S.
• Is Part Of: Journal of composite materials. Volume 56:Number 5(2022)
• Page Start: 797
• Page End: 810
• Publication Date: 2022-03
• Subjects: Autoclave -- thermal measurement -- heat transfer coefficient -- process simulation -- computational fluid dynamics -- finite element method -- quasi-transient coupling; Composite materials -- Periodicals; Composites -- Périodiques; 620.118
• DOI: 10.1177/00219983211063541
• Languages: English
• ISSNs: 0021-9983

Abstract

Structural aerospace composite parts are commonly cured through autoclave processing. To optimize the autoclave process, manufacturing process simulations have been increasingly used to investigate the thermal behavior of the cure assembly. Performing such a simulation, computational fluid dynamics (CFD) coupled with finite element method (FEM) model can be used to deal with the conjugate heat transfer problem between the airflow and solid regions inside the autoclave. A transient CFD simulation requires intensive computing resources. To avoid a long computing time, a quasi-transient coupling approach is adopted to allow a significant acceleration of the simulation process. This approach has been validated for a simple geometry in a previous study. This paper provides an experimental and numerical study on heat transfer in a medium-sized autoclave for a more complicated loading condition and a composite structure, a curved shell with three stringers, that mocks the fuselage structure of an aircraft. Two lumped mass calorimeters are used for the measurement of the heat transfer coefficients (HTCs) during the predefined curing cycle. Owing to some uncertainty in the inlet flow velocity, a correction parameter and calibration method are proposed to reduce the numerical error. The simulation results are compared to the experimental results, which consist of thermal measurements and temperature distributions of the composite shell, to validate the simulation model. This study shows the capability and potential of the quasi-transient coupling approach for the modeling of heat transfer in autoclave processing with reduced computational cost and high correlation between the experimental and numerical results.