Fracture path of cracks emigrating from two circular holes under blasting load. (August 2020)

• Record Type: Journal Article
• Authors: Yang, Liyun; Wang, Qingcheng; Xu, Longning; Yang, Renshu; Chao, Yuh J.
• Is Part Of: Theoretical and applied fracture mechanics. Volume 108(2020)
• Publication Date: 2020-08
• Subjects: Rock blasting -- Circular hole -- T-stress -- Crack initiation angle -- Crack propagation path; Fracture mechanics -- Periodicals; 620.1126
• DOI: 10.1016/j.tafmec.2020.102559
• Languages: English
• ISSNs: 0167-8442

Abstract

Highlights: Five crack models are established to simulate the effect of explosive gas. Analysis of the crack curve propagation tendency of each model. The crack propagation paths are performed. The main contribution to crack curving phenomenon has been determined. Abstract: In rock excavating and mining, blasting a row of circular holes is a common practice. It is often observed that cracks emanating from two adjacent holes tend to avoid each other when closely approached and form a hooked or butterfly-shaped loops. Five crack models were designed in this paper to study the propensity of forming the hook pattern. The five models are to simulate geometric imperfection in the field or laboratory for the two borehole case. Using the T -stress at the crack tip, the incremental crack growth method is adopted to simulate the crack propagation paths. The results showed that: (1) the T -stress values calculated from the first two models are negative, indicating curving (or hooking) cannot occur, (2) the T -stress at the crack tip is positive in the third model, and therefore crack curving (or hooking) may occur, (3) unlike the first three models, the fourth and fifth models are mixed mode I/II crack geometries and the mode II stress intensity factor dictates the crack curving direction, (4) the hook pattern would indeed happen under certain conditions.