Alkaline Water Electrolysis at 25 A cm−2 with a Microfibrous Flow‐through Electrode. Issue 25 (25th May 2020)

• Record Type: Journal Article
• Authors: Yang, Feichen; Kim, Myung Jun; Brown, Micah; Wiley, Benjamin J.
• Is Part Of: Advanced energy materials. Volume 10:Issue 25(2020)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2020-05-25
• Subjects: flow‐through electrodes -- hydrogen -- microfibers -- porous electrodes -- water splitting; Energy harvesting -- Materials -- Periodicals; Energy conversion -- Materials -- Periodicals; Energy storage -- Materials -- Periodicals; Photovoltaics -- Periodicals; Fuel cells -- Periodicals; Thermoelectric materials -- Periodicals; 621.31
• DOI: 10.1002/aenm.202001174
• Languages: English
• ISSNs: 1614-6832

Abstract

Abstract: The generation of renewable electricity is variable, leading to periodic oversupply. Excess power can be converted to H2 via water electrolysis, but the conversion cost is currently too high. One way to decrease the cost of electrolysis is to increase the maximum productivity of electrolyzers. This study investigates how nano‐ and microstructured porous electrodes can improve the productivity of H2 generation in a zero‐gap, flow‐through alkaline water electrolyzer. Three nickel electrodes—foam, microfiber felt, and nanowire felt—are studied to examine the tradeoff between surface area and pore structure on the performance of alkaline electrolyzers. Although the nanowire felt with the highest surface area initially provides the highest performance, this performance quickly decreases as gas bubbles are trapped within the electrode. The open structure of the foam facilitates bubble removal, but its small surface area limits its maximum performance. The microfiber felt exhibits the best performance because it balances high surface area with the ability to remove bubbles. The microfiber felt maintains a maximum current density of 25 000 mA cm −2 over 100 h without degradation, which corresponds to a hydrogen production rate 12.5‐ and 50‐times greater than conventional proton‐exchange membrane and alkaline electrolyzers, respectively. Abstract : Flow‐through alkaline electrolysis with a Ni microfiber felt improves the maximum H2 production rate by 50 times relative to conventional alkaline electrolyzers. Compared to Ni–Cu nanowires and Ni foam, Ni microfiber felt provides the most surface area for water splitting without blocking the removal of gas bubbles.