Perovskite Solar Cells go Outdoors: Field Testing and Temperature Effects on Energy Yield. Issue 25 (28th May 2020)

• Record Type: Journal Article
• Authors: Jošt, Marko; Lipovšek, Benjamin; Glažar, Boštjan; Al‐Ashouri, Amran; Brecl, Kristijan; Matič, Gašper; Magomedov, Artiom; Getautis, Vytautas; Topič, Marko; Albrecht, Steve
• Is Part Of: Advanced energy materials. Volume 10:Issue 25(2020)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2020-05-28
• Subjects: energy yields -- field tests -- outdoor measurements -- perovskite solar cells -- temperature coefficients; Energy harvesting -- Materials -- Periodicals; Energy conversion -- Materials -- Periodicals; Energy storage -- Materials -- Periodicals; Photovoltaics -- Periodicals; Fuel cells -- Periodicals; Thermoelectric materials -- Periodicals; 621.31
• DOI: 10.1002/aenm.202000454
• Languages: English
• ISSNs: 1614-6832

Abstract

Abstract: Perovskite solar cells (PSC) have shown that under laboratory conditions they can compete with established photovoltaic technologies. However, controlled laboratory measurements usually performed do not fully resemble operational conditions and field testing outdoors, with day‐night cycles, changing irradiance and temperature. In this contribution, the performance of PSCs in the rooftop field test, exposed to real weather conditions is evaluated. The 1 cm 2 single‐junction devices, with an initial average power conversion efficiency of 18.5% are tracked outdoors in maximum power point over several weeks. In parallel, irradiance and air temperature are recorded, allowing us to correlate outside factors with generated power. To get more insight into outdoor device performance, a comprehensive set of laboratory measurements under different light intensities (10% to 120% of AM1.5) and temperatures is performed. From these results, a low power temperature coefficient of −0.17% K −1 is extracted in the temperature range between 25 and 85 °C. By incorporating these temperature‐ and light‐dependent PV parameters into the energy yield model, it is possible to correctly predict the generated energy of the devices, thus validating the energy yield model. In addition, degradation of the tested devices can be tracked precisely from the difference between measured and modelled power. Abstract : In this paper, laboratory and rooftop performance of perovskite solar cells under changing temperature and irradiance is analyzed. By integrating laboratory data trends and measured weather data into optical energy yield model, the temperature‐dependent energy yield model is developed and validated, and can be used to predict generated energy of perovskite solar cells or track their degradation during field testing.