A Method for Manufacturing Flexible Microfluidic Chip Based on Soluble Material. (1st September 2021) - Wang, Junyao
Abstract : In this paper, a novel method for manufacturing flexible microfluidic chips without bonding process is proposed, which combines 3D printing technology and material dissolution technology. The manufacturing process of the microfluidic chip is as follows: a soluble HIPS mold with a preset shape is manufactured by 3D printing and placed in a molten PDMS solution for solidification. Soak in the limonene material to dissolve the mold and form a microchannel in the cured PDMS. Experimental studies have shown that the temperature and concentration of the limonene solution have an important effect on the dissolution rate. A 0.62 cm 3 HIPS mold has the fastest dissolution rate at 100°C and 50% concentration. The proposed method provided a new idea for fabricating flexible microfluidic chip. Compared to bonding process, it has the characteristics of not relying on complicated processing conditions and low manufacturing cost.