Fabrication of zirconia all‐ceramic crown via DLP‐based stereolithography. Issue 3 (17th December 2019)

• Record Type: Journal Article
• Authors: Li, Xingbang; Zhong, He; Zhang, Jingxian; Duan, Yusen; Li, Jingjing; Jiang, Dongliang
• Is Part Of: International journal of applied ceramic technology. Volume 17:Issue 3(2020)
• Page Start: 844
• Page End: 853
• Publication Date: 2019-12-17
• Subjects: ceramic stereolithography -- microstructure -- rheological properties -- zirconia all‐ceramic crown; Ceramics -- Periodicals; Ceramics -- Technological innovations -- Periodicals; 620.1405
• DOI: 10.1111/ijac.13441
• Languages: English
• ISSNs: 1546-542X

Abstract

Abstract: Zirconia ceramics have shown a wide applicable prospect in dental prosthetics because it possesses excellent mechanical performance and biocompatibility. The rheological behavior and curing properties of zirconia stereolithography slurry were studied, as well as the microstructure of the green, pyrolyzed, and sintered body. Variquat CC‐42 NS was proved to be effective for zirconia powder dispersing in photocurable resin (SP‐RC700). The curing characteristic of slurry showed that the depth of penetration tended to increase with the solid loading. Finally, the zirconia all‐ceramic crowns were fabricated via DLP‐based stereolithography printer. Results showed that the particles were evenly distributed in the cured resin matrix without obvious agglomeration, and the interlayered structure disappeared after binder burnout. The sample with a major crystalline phase of tetragonal zirconia and a porosity of 10(1)% were obtained after sintering at 1550°C.