Vibration of laminated-beams based on reference-plane formulation: Effect of end supports at different heights of the beam. (15th March 2018)

• Record Type: Journal Article
• Authors: Fernando, D.; Wang, C.M.; Roy Chowdhury, A.N.
• Is Part Of: Engineering structures. Volume 159(2018)
• Page Start: 245
• Page End: 251
• Publication Date: 2018-03-15
• Subjects: Mid-plane -- Neutral plane -- Vibration -- Beam theory -- Laminated beams -- Support positions along beam height; Structural engineering -- Periodicals; Structural analysis (Engineering) -- Periodicals; Construction, Technique de la -- Périodiques; Génie parasismique -- Périodiques; Pression du vent -- Périodiques; Earthquake engineering; Structural engineering; Wind-pressure; Periodicals; 624.105
• DOI: 10.1016/j.engstruct.2018.01.004
• Languages: English
• ISSNs: 0141-0296

Abstract

Highlights: Conventional beam elements cannot be used to predict the vibration frequencies of beams where the end supports are placed elsewhere from the mid-plane. Proposed method can accurately capture the effect of end support position on vibration frequencies. For immovable boundary conditions, vibration frequency increases if the supports are applied away from the mid-plane. In the case of clamped supports, the position of the supports do not affect the vibration frequencies. Abstract: Conventional beam elements based on the mid-plane formulation are often used to predict vibration frequencies of beams. Recently published work on the vibration of functionally graded materials (FGM) beams shows that if the positions of immovable end supports are at a different plane to the middle-plane, beam elements based on mid-plane formulation will yield inaccurate results. This paper extends this work further by critically examining the effect of end support positions along the height of the beam in the context of vibration analysis. A formulation for vibration analysis of beams based on reference-plane formulation is proposed. In order to verify the proposed formulation, we considered FE modelling of beams based on generalized beam elements, composite shell elements and 3D solid elements that are able to accurately capture the effect of end support height position on vibration frequencies. Two vibrating beam examples are considered. The first problem deals with a single layer beams and the second problem deals with a double layer beam. Both problems are analyzed using the proposed method and FE models based on generalized beam elements, composite shell elements and 3D solid elements for different end support conditions and heights. Single layer beam was also modelled in FE using conventional beam elements. The results clearly showed that if one uses conventional beam elements for vibration analysis of beams, the results will not be accurate if immovable end supports are applied at an eccentricity to the mid-plane. Vibration frequencies predicted from the proposed reference-plane formulation were shown to agree well with the results from FE models based on generalized beam elements, composite shell elements, and 3D solid elements.