Enhancement of syngas production via co-gasification and renewable densified fuels (RDF) in an open-top downdraft gasifier: Case study of Indonesian waste. (October 2021)

• Record Type: Journal Article
• Authors: Wiyono, Apri; Saw, Lip Huat; Anggrainy, Rani; Husen, Asep Setiadi; Purnawan, ; Rohendi, Dedi; Gandidi, Indra Mamad; Adanta, Dendy; Pambudi, Nugroho Agung
• Is Part Of: Case studies in thermal engineering. Volume 27(2021)
• Publication Date: 2021-10
• Subjects: Syngas production -- Co-gasification -- Renewable densified fuels -- Open-top downdraft gasifier; Heat engineering -- Case studies -- Periodicals; 621.40205
• DOI: 10.1016/j.csite.2021.101205
• Languages: English
• ISSNs: 2214-157X

Abstract

Abstract: The global increase in world population is followed with a rise in waste generation and energy needs in various sectors. Organic waste, also known as biomass, is the most substantial contribution of the waste generation and it also can be utilized in energy generation. Therefore, the purpose of this study is to analyze the syngas production from co-gasification using Renewable Densified Fuels (RDF) with gasification temperature, lower heating and gas emission values, on the performance of the biomass co-gasification process in an open-top downdraft fixed bed gasifier. In this study organic waste used woods, coconut fibers and rice husks in pellets to blend the compositions of raw materials during the co-gasification process. The method used is the co-gasification technique with feed pellets WCF (wood-coconut fiber) and RH (rice husk) in various compositions, for example: 100% WCF, with 0% of RH, 75 WCF: 25 RH, 50 WCF: 50RH, 25 WCF: 75RH and all 100% RH with 0WCF. Furthermore, the syngas testing was directly measured on the burner with TCD type Shimadzu 8A gas chromatography. The result showed that the highest reactor temperature in the pyrolysis zone is 700 °C–900 °C which was significantly stable at 800 °C with oxidation temperature of 1000 °C–1100 °C. Furthermore, the result of the synthetic gas showed that the highest lower heating value of 100% WCF pellet composition at 3.582 kJ/Nm 3 and lower heating value of RDF blending composition (75:25) at 3.392 kJ/Nm 3 . The increase in pellet fuels also leads to a rise in the LHV syngas value. These results produced a visually low tar content and ash particles in all compositions by approximately 30–35% of the initial mass, with the lowest ash in 100% WCF pellets composition at 0.25 g.