Numerical investigation of thermal hydraulic behaviors in wire-wrapped bundle with smaller wire diameter of peripheral rods. (1st December 2021) - Lyu, Kefeng
Highlights: A new pattern bundle with a smaller wire diameter of peripheral rods was proposed. The comparative study between the new bundle and the conventional one was carried out by RANS-based CFD simulation. The better flow and heat transfer performance was obtained for the new pattern bundle. Abstract: In this paper, a new pattern bundle with a smaller wire diameter of peripheral rods was proposed. By decreasing the wire diameter of peripheral rods, the flow area of peripheral sub-channels is reduced diverting more coolant towards the central sub-channels. This would lead to a more uniform sub-channel temperatures distribution. To analyze the flow and heat transfer performance of the new bundle, the comparative study between the new bundle and conventional one was carried out by RANS-based CFD simulation. It was found that decreasing the partial wire diameters, the uniformity of coolant flow distribution is improved, resulting in a more homogeneous temperature distribution. The local transverse pressure difference characterizing global swirl motion is smaller, resulting in a weaker sweeping flow in peripheral sub-channels. Moreover, the obvious sweeping flow also could be observed in inter-connected sub-channels due to the smaller wire diameter of peripheral rods. At last, Nusselt number and friction factor are the parameters targeted for the investigation, and the results show that the thermal-hydraulics performance of the new bundle has been significantly improved. Through the research of this paper, the qualitative understanding of fuel assembly structure optimization could be provided for the core design in future.